コースのチャプター
トレーニング · トラック 4. ドキュメントと成果物 · チャプター 4.2(全 5 チャプター)
4.2 ドキュメント内のライブマトリックス 2:48
モデルから自動的に再構築される RVTM と RTM の表を挿入します。
Holarch 1.27 の画面です。
学習内容
- ドキュメントのテキストにライブマトリックスを挿入し、その範囲を選ぶ
- マトリックスが強調表示するギャップを読む
- モデルでギャップを解消し、マトリックスが更新されるのを確認する
- 標準のマトリックスと、それぞれがギャップとして示すものを挙げる
Bike-Share Dock の仕様書にある空の検証表を、ライブの要求検証トレーサビリティマトリックスに置き換えます。範囲を選び、強調表示されたギャップを読み、モデルで 1 つ解消してマトリックスが更新されるのを確認し、同じ方法で要求トレーサビリティマトリックスを追加します。
プロジェクトファイル
- 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
- 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。
演習
CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。
- EO-1 デモプロジェクトを開くか、作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング)。
- ニーズと要求 → ドキュメント → EO-1 System Requirements Specification を開き、セクション 2 Attitude Determination and Control の説明をクリックして編集します。
- リッチテキストのツールバーで + を開き、マトリックス…を選びます。要求割り当てマトリックスを選び、範囲はこのドキュメントのままにして挿入をクリックし、⌘ / Ctrl↵ を押して保存します。
- キャプションと網掛けの行を確認します。2.5 Safe Mode Recovery はギャップです。これを満たすものがありません。
- 2.5 を選択し、そのトレースセクションで satisfied by の下に F10 Enter Safe Mode をリンクします。セクション 2 に戻り、マトリックスをもう一度確認します。
割り当てマトリックスの 2.5 の行に F10 Enter Safe Mode が表示され、網掛けが消えていれば完了です。
確認問題
- ライブマトリックスは、手入力した表とどう違いますか?
- ギャップをマトリックスではなくモデルで解消するのはなぜですか?
- マトリックスはどの範囲を対象にできますか?
解答を表示
ライブマトリックスは、手入力した表とどう違いますか?
ブロックには、どのマトリックスをどの範囲で表示するかだけが保存されます。Holarch はドキュメントを表示またはエクスポートするたびにモデルから行を再構築するため、内容が古くなることはありません。
ギャップをマトリックスではなくモデルで解消するのはなぜですか?
ライブマトリックスはセル単位では編集できません。ギャップはモデル内のリンクや属性の欠落であり、モデルで修正すると、それを表示するすべてのマトリックスとビューが更新されます。
マトリックスはどの範囲を対象にできますか?
1 つのドキュメントの項目、コンピレーションのすべてのパート、またはプロジェクト全体です。インターフェースマトリックスと N² マトリックスは、1 つの Asset または Action の子を対象にすることもできます。
関連資料
トランスクリプト
トランスクリプトを表示 (ナレーションと画面の内容)
Introduction
Chapter two: live matrices in documents. Reviewers ask for traceability and verification matrices. In Holarch you don't fill them in by hand: a matrix in a document is rebuilt from the model whenever it is shown or exported.
You will insert a verification matrix into a specification, choose its scope, read the gaps it highlights, close a gap in the model, and add a traceability matrix.
Insert a matrix
Open the Bike-Share Dock system requirements. Its template ends with a verification approach, and section 11.1, Verification Matrix, holds an empty table to fill in by hand.
On screen: Documents → the SRS → Outline → 11.1 Verification Matrix.
Replace it with a live matrix. Click the section's text to edit it, select the empty table, and delete it.
On screen: Edit 11.1 → select → delete.
Open the plus menu, and choose Matrix. Pick the Requirements Verification Traceability Matrix. The scope starts on this document, which holds three of the project's six requirements. Choose Whole project, to cover them all.
On screen: + → Matrix… → RVTM → Scope: Whole project.
The preview lists each requirement with its verification method, its level, the test cases that verify it, and its status. Click Insert, then press Command Return to save the text.
On screen: Insert → Save.
Read the gaps
The matrix sits in the document with a dashed outline. Two rows are shaded as gaps. Show Available Bikes has a method but no test case yet. Anchored Without Digging has no verification method at all.
On screen: The live RVTM in 11.1, two gaps.
Close a gap
Close one gap in the model. Go to section 10, and select 10.2, Anchored Without Digging. In the inspector, click + Label and choose Inspection. The verification method is both a label and an attribute, so either one sets it.
On screen: Outline → 10.2 → inspector + Label → Inspection.
Go back to the matrix. The row for 10.2 now shows Inspection, without touching the matrix. It is still shaded, because no test case verifies it yet: the matrix shows the model as it is.
On screen: Outline → 11.1: the 10.2 row now shows Inspection.
Add an RTM
Add a traceability matrix the same way. Go to section 12, Traceability, edit its text, and insert the Requirements Traceability Matrix for the whole project: each requirement with its parent, the needs it traces from, what it traces to, and what satisfies it.
On screen: 12 Traceability → + → Matrix… → RTM → Whole project → Insert → Save.
Recap
The verification cross-reference matrix, with one column per method, works the same way. Let's recap. You inserted live matrices, chose their scope, read the gaps, and closed one in the model.
Next, you turn the document and its matrices into Word and Excel files.