Holarch
Kurskapitel

Schulung · Reihe 4. Dokumente und Liefergegenstände · Kapitel 4.2 von 5

4.2 Live-Matrizen in Dokumenten 2:48

RVTM- und RTM-Tabellen einfügen, die sich selbst aus dem Modell neu aufbauen.

Zeigt Holarch 1.27.

← 4.1 Dokumentvorlagen · Alle Kapitel · 4.3 Ausgabe nach Word und Excel →

Das lernen Sie

  • Eine Live-Matrix in den Text eines Dokuments einfügen und ihren Umfang wählen
  • Die Lücken ablesen, die eine Matrix hervorhebt
  • Eine Lücke im Modell schließen und sehen, wie sich die Matrix aktualisiert
  • Die Standardmatrizen benennen und was jede als Lücke markiert

Ersetzen Sie die leere Verifikationstabelle in der Spezifikation des Bike-Share Dock durch eine Live-Matrix zur Anforderungsverifikation und -nachverfolgbarkeit, wählen Sie ihren Umfang, lesen Sie die hervorgehobenen Lücken ab, schließen Sie eine im Modell und sehen Sie, wie sich die Matrix aktualisiert, und fügen Sie dann auf dieselbe Weise eine Anforderungs-Nachverfolgbarkeitsmatrix hinzu.

Projektdateien

  • Startprojekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)
  • Fertiges Projekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)

Das Video wird von holarch.app abgespielt; siehe Datenschutzerklärung.

Übung

Führen Sie dies selbst in Holarch durch, am Demoprojekt CubeSat EO-1.

  1. Öffnen Sie Ihr EO-1-Demoprojekt oder erstellen Sie es: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → CubeSat (Geführtes Systems Engineering).
  2. Öffnen Sie Bedarfe & Anforderungen → Dokumente → EO-1 System Requirements Specification und klicken Sie auf die Beschreibung des Abschnitts 2 Attitude Determination and Control, um sie zu bearbeiten.
  3. Öffnen Sie in der Rich-Text-Symbolleiste + und wählen Sie Matrix…. Wählen Sie Requirement Allocation Matrix, belassen Sie den Umfang auf diesem Dokument, klicken Sie auf Einfügen und drücken Sie ⌘ / Ctrl↵, um zu speichern.
  4. Lesen Sie die Beschriftung und die schattierten Zeilen. 2.5 Safe Mode Recovery ist eine Lücke: Nichts erfüllt sie.
  5. Wählen Sie 2.5 aus und verknüpfen Sie in ihrem Abschnitt Nachverfolgung F10 Enter Safe Mode unter satisfied by. Gehen Sie zurück zu Abschnitt 2 und lesen Sie die Matrix erneut.

Sie sind fertig, wenn die Zeile 2.5 der Zuordnungsmatrix F10 Enter Safe Mode auflistet und nicht mehr schattiert ist.

Selbsttest

  1. Wie unterscheidet sich eine Live-Matrix von einer Tabelle, die Sie eintippen?
  2. Warum schließen Sie eine Lücke im Modell und nicht in der Matrix?
  3. Welche Umfänge kann eine Matrix abdecken?
Antworten anzeigen
  1. Wie unterscheidet sich eine Live-Matrix von einer Tabelle, die Sie eintippen?

    Der Block speichert nur, welche Matrix und welcher Umfang gezeigt werden. Holarch baut die Zeilen bei jeder Anzeige oder jedem Export des Dokuments neu aus dem Modell auf, daher veraltet sie nie.

  2. Warum schließen Sie eine Lücke im Modell und nicht in der Matrix?

    Eine Live-Matrix lässt sich nicht Zelle für Zelle bearbeiten. Die Lücke ist ein fehlender Link oder ein fehlendes Attribut im Modell, und die Korrektur dort aktualisiert jede Matrix und Ansicht, die sie zeigt.

  3. Welche Umfänge kann eine Matrix abdecken?

    Die Elemente eines Dokuments, alle Teile einer Zusammenstellung oder das ganze Projekt. Die Schnittstellen- und N²-Matrizen können auch die Kinder eines Asset oder einer Action abdecken.

Weiterlesen

Transkript

Transkript anzeigen (Erzählung und Bildschirminhalt)

Introduction

Chapter two: live matrices in documents. Reviewers ask for traceability and verification matrices. In Holarch you don't fill them in by hand: a matrix in a document is rebuilt from the model whenever it is shown or exported.

You will insert a verification matrix into a specification, choose its scope, read the gaps it highlights, close a gap in the model, and add a traceability matrix.

Insert a matrix

Open the Bike-Share Dock system requirements. Its template ends with a verification approach, and section 11.1, Verification Matrix, holds an empty table to fill in by hand.

On screen: Documents → the SRS → Outline → 11.1 Verification Matrix.

Replace it with a live matrix. Click the section's text to edit it, select the empty table, and delete it.

On screen: Edit 11.1 → select → delete.

Open the plus menu, and choose Matrix. Pick the Requirements Verification Traceability Matrix. The scope starts on this document, which holds three of the project's six requirements. Choose Whole project, to cover them all.

On screen: + → Matrix… → RVTM → Scope: Whole project.

The preview lists each requirement with its verification method, its level, the test cases that verify it, and its status. Click Insert, then press Command Return to save the text.

On screen: Insert → Save.

Read the gaps

The matrix sits in the document with a dashed outline. Two rows are shaded as gaps. Show Available Bikes has a method but no test case yet. Anchored Without Digging has no verification method at all.

On screen: The live RVTM in 11.1, two gaps.

Close a gap

Close one gap in the model. Go to section 10, and select 10.2, Anchored Without Digging. In the inspector, click + Label and choose Inspection. The verification method is both a label and an attribute, so either one sets it.

On screen: Outline → 10.2 → inspector + Label → Inspection.

Go back to the matrix. The row for 10.2 now shows Inspection, without touching the matrix. It is still shaded, because no test case verifies it yet: the matrix shows the model as it is.

On screen: Outline → 11.1: the 10.2 row now shows Inspection.

Add an RTM

Add a traceability matrix the same way. Go to section 12, Traceability, edit its text, and insert the Requirements Traceability Matrix for the whole project: each requirement with its parent, the needs it traces from, what it traces to, and what satisfies it.

On screen: 12 Traceability → + → Matrix… → RTM → Whole project → Insert → Save.

Recap

The verification cross-reference matrix, with one column per method, works the same way. Let's recap. You inserted live matrices, chose their scope, read the gaps, and closed one in the model.

Next, you turn the document and its matrices into Word and Excel files.