Kurs bölümleri
Eğitim · Kurs 2. Gereksinimler ve doğrulama · Bölüm 2.6 / 6
2.6 RVTM ve VCRM 2:29
RVTM'de doğrulama kapsamını okuyun ve şartnameye ve Word'e canlı bir VCRM koyun.
Holarch 1.27'yi gösterir.
Neler öğreneceksiniz
- Doğrulama kapsamını RVTM kartlarından okuyun ve tek bir duruma göre filtreleyin
- RVTM ile VCRM arasındaki farkı açıklayın
- RVTM'yi Excel'e dışa aktarın
- Bir şartnameye canlı bir doğrulama matrisi ekleyin ve bir matrisi Word'e dışa aktarın
Bike-Share Dock için doğrulamayı raporlayın: kapsam kartları ve filtresiyle RVTM sayfası, bir Excel dışa aktarması, şartnamenin doğrulama bölümüne eklenmiş canlı bir VCRM ve aynı matrisin Word'e dışa aktarılması.
Proje dosyaları
- Başlangıç projesi (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
- Bitmiş proje (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.
Alıştırma
Bunu Holarch'ta, CubeSat EO-1 demo projesinde kendiniz yapın.
- EO-1 demo projenizi açın (veya oluşturun: Projeleri yönet → Proje dosyaları ▾ → Yeni demo proje → CubeSat (Rehberli sistem mühendisliği)).
- Doğrulama → RVTM'yi açın. Başarısız kartına tıklayın ve başarısız TC-04 ve TC-09 testlerinin hangi gereksinimleri doğruladığını not edin. Filtreyi temizlemek için çipe tıklayın.
- Tabloyu VCRM'ye geçirin ve hiçbir yöntem sütununda X olmayan gereksinimleri bulun.
- Dışa aktar ▾ → Excel (.xlsx)'e tıklayın ve dosyayı açın.
- EO-1 System Requirements Specification'ı açın, 5 Communications bölümünü seçin ve Yaz ▾ → Ekle ▸ → Matris…'i seçin. Doğrulama Düzeyine Göre VCRM'yi seçin, kapsamı bu belgede bırakın ve Ekle'ye tıklayın.
- Teslim et ▾ → İzlenebilirlik Matrisi…'ni seçin, RVTM'yi belirleyin, Farklı dışa aktar altında Matris (Word)'ü seçin, Model'i SRR Baseline olarak ayarlayın ve Dışa aktar'a tıklayın.
Şartname düzeye göre canlı bir VCRM gösterdiğinde ve başlığında SRR Baseline adı geçen bir Word RVTM'niz olduğunda işiniz bitmiştir.
Kendinizi sınayın
- Hangi matris her gereksinimin nasıl doğrulanacağını, hangisi doğrulanıp doğrulanmadığını yanıtlar?
- Neden şartnameye bir tablo yapıştırmak yerine matris canlı içerik olarak eklenmeli?
- İmzalı bir teslimat için matris neden bir temel çizgiden dışa aktarılmalı?
Yanıtları göster
Hangi matris her gereksinimin nasıl doğrulanacağını, hangisi doğrulanıp doğrulanmadığını yanıtlar?
VCRM her gereksinim için planlanan yöntemleri gösterir. RVTM ise yöntemleri, her gereksinimi doğrulayan testleri ve bunların sonuçlarını gösterir.
Neden şartnameye bir tablo yapıştırmak yerine matris canlı içerik olarak eklenmeli?
Canlı bir matris modelden oluşturulur. Bir yöntem değiştiğinde veya bir test başarılı olduğunda, matris ve belgenin her dışa aktarması onunla birlikte değişir.
İmzalı bir teslimat için matris neden bir temel çizgiden dışa aktarılmalı?
İmzalı bir belge modeli bugünkü hâliyle değil, üzerinde uzlaşıldığı hâliyle göstermelidir. Bir temel çizgiden alınan matris o temel çizginin öğelerini ve ilişkilerini kullanır.
Daha fazla bilgi
Döküm
Dökümü göster (anlatım ve ekranda görünenler)
Introduction
Chapter six: the RVTM and the VCRM. These two matrices answer the question every review asks: how will each requirement be verified, and has it been?
This is the last chapter of Requirements and Verification.
The matrices
The RVTM lists each requirement with its method, its level, the tests that verify it and their result. The VCRM is a cross-reference: a column per method, with a mark where that method is planned. Both are built from the model, so they are always current.
On screen: Card: RVTM and VCRM.
The RVTM page
Open Verification, then RVTM. The cards count the requirements by status: one verified, one with a method planned but no test yet, and seven with nothing planned.
On screen: Verification → RVTM.
Click Unverified to list only those seven. They are the work still to plan: each needs a method, and a test or another way to show it is met.
On screen: Unverified card.
Export sends the matrix to Excel, with gaps shaded red, for anyone outside the model.
On screen: Export ▾ → Excel (.xlsx).
A live VCRM in the specification
A specification usually carries its own verification matrix. Open the specification, and select section 11.1, Verification Matrix. Open Write, then Insert, and choose Matrix.
On screen: SRS → 11.1 → Write ▾ → Insert → Matrix…
Choose the Verification Cross-Reference Matrix, keep the scope on this document, and check the preview. Click Insert.
On screen: VCRM → Insert.
The matrix is now part of the section. It is live: when a test passes or a method changes, the matrix in the specification changes with it, and so does every export.
On screen: The VCRM in the document.
Export
To send it on its own, open Deliver, choose Traceability Matrix, pick the VCRM and Word, and click Export. In Word the method columns are narrow, with a legend, and gaps are shaded.
On screen: Deliver ▾ → Traceability Matrix… → VCRM, Matrix (Word) → Export.
Recap
Let's recap. You read verification coverage on the RVTM page, filtered the unverified requirements, exported to Excel, put a live VCRM in the specification, and exported it to Word.
That completes Requirements and Verification. You can now write and check requirements, trace them, take them through review and change, verify them, and report coverage.
On screen: Track complete card, then end card.