Holarch
Capítulos del curso

Formación · Curso 2. Requisitos y verificación · Capítulo 2.6 de 6

2.6 RVTM y VCRM 2:29

Leer la cobertura de verificación en la RVTM y colocar una VCRM dinámica en la especificación y en Word.

Muestra Holarch 1.27.

← 2.5 La verificación y el Centro de pruebas · Todos los capítulos

Lo que aprenderá

  • Leer la cobertura de verificación en las tarjetas de la RVTM y filtrar por un estado
  • Explicar la diferencia entre la RVTM y la VCRM
  • Exportar la RVTM a Excel
  • Insertar una matriz de verificación dinámica en una especificación y exportar una matriz a Word

Informe sobre la verificación del Bike-Share Dock: la página RVTM con sus tarjetas de cobertura y su filtro, una exportación a Excel, una VCRM dinámica insertada en la sección de verificación de la especificación y la misma matriz exportada a Word.

Archivos de proyecto

  • Proyecto inicial (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
  • Proyecto terminado (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)

El vídeo se reproduce desde holarch.app; consulte la Política de privacidad.

Práctica

Hágalo usted mismo en Holarch, en el proyecto de demostración CubeSat EO-1.

  1. Abra su proyecto de demostración EO-1 (o créelo: Gestionar proyectos → Archivos de proyecto ▾ → Nuevo proyecto de demostración → CubeSat (ingeniería de sistemas guiada)).
  2. Abra Verificación → RVTM. Haga clic en la tarjeta Fallido y anote qué requisitos verifican las pruebas fallidas TC-04 y TC-09. Haga clic en el chip para quitar el filtro.
  3. Cambie la tabla a VCRM y busque los requisitos sin X en ninguna columna de método.
  4. Haga clic en Exportar ▾ → Excel (.xlsx) y abra el archivo.
  5. Abra EO-1 System Requirements Specification, seleccione la sección 5 Communications y elija Escribir ▾ → Insertar ▸ → Matriz…. Elija VCRM por nivel de verificación, mantenga el ámbito en este documento y haga clic en Insertar.
  6. Elija Entregar ▾ → Matriz de trazabilidad…, elija la RVTM, elija Matriz (Word) en Exportar como, fije Modelo en SRR Baseline y haga clic en Exportar.

Habrá terminado cuando la especificación muestre una VCRM dinámica por nivel y tenga una RVTM en Word cuyo título nombre la SRR Baseline.

Compruebe lo aprendido

  1. ¿Qué matriz responde a cómo se verificará cada requisito y cuál a si ya se ha verificado?
  2. ¿Por qué insertar la matriz como contenido dinámico en lugar de pegar una tabla en la especificación?
  3. ¿Por qué exportar una matriz desde una línea base para un entregable firmado?
Mostrar las respuestas
  1. ¿Qué matriz responde a cómo se verificará cada requisito y cuál a si ya se ha verificado?

    La VCRM muestra los métodos previstos por requisito. La RVTM muestra los métodos, las pruebas que verifican cada requisito y sus resultados.

  2. ¿Por qué insertar la matriz como contenido dinámico en lugar de pegar una tabla en la especificación?

    Una matriz dinámica se construye a partir del modelo. Cuando cambia un método o se aprueba una prueba, la matriz y todas las exportaciones del documento cambian con ella.

  3. ¿Por qué exportar una matriz desde una línea base para un entregable firmado?

    Un documento firmado debe mostrar el modelo tal como se acordó, no tal como es hoy. Una matriz desde una línea base usa los elementos y relaciones de esa línea base.

Más información

Transcripción

Mostrar la transcripción (narración y lo que aparece en pantalla)

Introduction

Chapter six: the RVTM and the VCRM. These two matrices answer the question every review asks: how will each requirement be verified, and has it been?

This is the last chapter of Requirements and Verification.

The matrices

The RVTM lists each requirement with its method, its level, the tests that verify it and their result. The VCRM is a cross-reference: a column per method, with a mark where that method is planned. Both are built from the model, so they are always current.

On screen: Card: RVTM and VCRM.

The RVTM page

Open Verification, then RVTM. The cards count the requirements by status: one verified, one with a method planned but no test yet, and seven with nothing planned.

On screen: Verification → RVTM.

Click Unverified to list only those seven. They are the work still to plan: each needs a method, and a test or another way to show it is met.

On screen: Unverified card.

Export sends the matrix to Excel, with gaps shaded red, for anyone outside the model.

On screen: Export ▾ → Excel (.xlsx).

A live VCRM in the specification

A specification usually carries its own verification matrix. Open the specification, and select section 11.1, Verification Matrix. Open Write, then Insert, and choose Matrix.

On screen: SRS → 11.1 → Write ▾ → Insert → Matrix…

Choose the Verification Cross-Reference Matrix, keep the scope on this document, and check the preview. Click Insert.

On screen: VCRM → Insert.

The matrix is now part of the section. It is live: when a test passes or a method changes, the matrix in the specification changes with it, and so does every export.

On screen: The VCRM in the document.

Export

To send it on its own, open Deliver, choose Traceability Matrix, pick the VCRM and Word, and click Export. In Word the method columns are narrow, with a legend, and gaps are shaded.

On screen: Deliver ▾ → Traceability Matrix… → VCRM, Matrix (Word) → Export.

Recap

Let's recap. You read verification coverage on the RVTM page, filtered the unverified requirements, exported to Excel, put a live VCRM in the specification, and exported it to Word.

That completes Requirements and Verification. You can now write and check requirements, trace them, take them through review and change, verify them, and report coverage.

On screen: Track complete card, then end card.