פרקי הקורס
הדרכה · מסלול 13. לוחות ציור · פרק 13.3 מתוך 4
13.3 תרשימים 3:32
מוסיפים תרשימים, נותנים להם נתונים, משנים את הסוג שלהם, בוחרים את הנתונים שלהם, מעצבים את הצירים שלהם ומייבאים תרשימים מ-Excel.
מציג את Holarch 2.35.
מה תלמדו
- להוסיף תרשים ולתת לו נתונים ב“נתוני התרשים”, בהקלדה, בהדבקה או בייבוא מקובץ
- לשנות את סוג התרשים, כולל מוערם ומוערם 100%
- להחליף שורות ועמודות ולסדר סדרות ב“בחירת נתונים”
- להפעיל רכיבי תרשים ולהגדיר גבולות ויחידות של ציר ב“עיצוב ציר”
- לייבא תרשימים מחוברת עבודה של Excel
מוסיפים לוח של תרשימי שימוש ללוח הציור של הקונספט Bike-Share Dock: מוסיפים תרשים עמודות, עורכים את הנתונים שלו ומייבאים את נתוני ההשכרה מגיליון Excel, מעבירים אותו לתרשים עמודות מוערמות בגלריה “שינוי סוג התרשים” (עם התצוגות המקדימות של מוערם 100%, פסים, קו, עוגה, טבעת ופיזור), מסדרים מחדש ומחליפים סדרות ב“בחירת נתונים”, מפעילים תוויות נתונים ומזיזים את המקרא ב“רכיבי תרשים”, מגדירים את הגבולות והיחידות של ציר הערכים ב“עיצוב ציר”, ומייבאים תרשים קו ותרשים עוגה מחוברת עבודה של Excel עם “ייבוא תרשים מ-Excel”.
קובצי פרויקט
- פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
- פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עושים את זה בעצמכם ב-Holarch, על Bike-Share Dock.
- פותחים את קובץ ההתחלה של הפרק ואת לוח הציור Dock Concept. לוחצים על + ברצועת הלוחות.
- פותחים את טבלאות ותרשימים ולוחצים על עמודה. לוחצים לחיצה כפולה על התרשים, לוחצים על ייבוא מקובץ… ובוחרים חוברת עבודה משלכם עם עמודת תוויות ושתי עמודות מספרים.
- לחיצה ימנית על התרשים ← שינוי סוג התרשים… ← עמודות מוערמות ← אישור.
- בסעיף תרשים לוחצים על בחירת נתונים…, מנסים פעמיים את החלפת שורה/עמודה, מזיזים סדרה למעלה ולוחצים על אישור.
- מסמנים תוויות נתונים, מגדירים את המקרא ל-למעלה, לוחצים על ציר הערכים ומגדירים מקסימום ו-ראשי.
- לוחצים על ייבוא תרשים מ-Excel… ומוסיפים תרשים מחוברת עבודה שיש בה תרשימים.
סיימתם כשבלוח יש תרשים עמודות מוערמות עם תוויות נתונים, מקרא למעלה וגבולות ציר קבועים, ותרשים אחד שיובא מ-Excel.
בדיקה עצמית
- מתי תרשים מוערם 100% עדיף על תרשים מוערם?
- מה עושה “החלפת שורה/עמודה”?
- איך חוזרים לגבול ציר אוטומטי אחרי שהגדרתם אחד?
הצגת התשובות
מתי תרשים מוערם 100% עדיף על תרשים מוערם?
כשהחלקים חשובים יותר מהסכומים: כל עמודה ממלאת את כל הגובה, והמקטעים מראים את החלק של כל סדרה.
מה עושה “החלפת שורה/עמודה”?
היא מחליפה בין סדרות לקטגוריות: השורות הופכות לסדרות והעמודות לקטגוריות, או להפך.
איך חוזרים לגבול ציר אוטומטי אחרי שהגדרתם אחד?
מרוקנים את התיבה ב“עיצוב ציר”.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Chapter three: charts. A whiteboard chart draws its own data, which you type, paste or import, and you format it the way you would in a spreadsheet.
In this chapter you build a board of usage charts for the dock.
A chart and its data
The charts get a board of their own. Click the plus in the Boards strip under the board: the new board opens as a second tab.
On screen: Boards strip → +.
Open the Tables and Charts panel, and click Column. The chart is added in the middle of the view, with sample data.
On screen: Tables and Charts panel → Column.
Double-click the chart to open Chart Data. Labels go in the first column and series names in the first row. You can type in the grid, add rows and series, or paste rows copied from a spreadsheet.
On screen: Double-click the chart → Chart Data.
Our rental figures are in a workbook. Click Import from File, and choose Dock Usage.
On screen: Import from File… → Dock Usage.xlsx.
The workbook has three sheets. Choose Rentals. The preview shows six months and two series, weekday and weekend. Click Use Imported Data, then Done.
On screen: Sheet: Rentals → Use Imported Data → Done.
Chart types
Right-click the chart, and choose Change Chart Type. The gallery shows your own data in every type.
On screen: Right-click → Change Chart Type….
Stacked column stacks each month's series, so the bar shows the total. One hundred percent stacked compares the shares. Bar turns the chart on its side, and line, pie, donut and scatter are here too.
On screen: Gallery: Stacked Column, 100% Stacked Column, Bar, Line, Pie, Donut, Scatter.
Choose Stacked Column, and click OK.
On screen: Stacked Column → OK.
Select Data
Select Data, in the Chart section, chooses what the chart shows. Switch Row and Column turns the months into the series and the series into the categories. Switch it back.
On screen: Chart section → Select Data… → Switch Row/Column, twice.
Legend entries lists the series. Select Weekend, and click Move Up: weekend now sits at the bottom of each stack, and keeps its color. Click OK.
On screen: Weekend → Move Up → OK.
Format the chart
Chart Elements turns the parts of the chart on and off. Tick Data labels, and set the legend position to Top.
On screen: Chart Elements → Data labels; Legend position: Top.
Click the numbers of the value axis to select the axis. A dashed box marks it, and the inspector shows Format Axis.
On screen: Click the value axis.
Set the maximum to three thousand, and the major unit to five hundred. Leave a box empty for automatic. Every change is one undo step.
On screen: Format Axis: Maximum 3000, Major 500.
Import charts from Excel
Charts made in Excel come in too. In the Tables and Charts panel, click Import Chart from Excel, and choose the workbook.
On screen: Import Chart from Excel… → Dock Usage.xlsx.
The dialog lists every chart in the workbook, with a preview, its sheet, its type and its series, and says what does not carry over. Tick the line chart and the pie chart, and click Insert.
On screen: Tick the line and pie charts → Insert 2 Charts.
They arrive selected, as whiteboard charts with their titles, colors and axes. Drag them below the first chart. You edit and format them like the one you made.
On screen: Drag the imported charts below the column chart.
Recap
To recap: insert a chart from the Tables and Charts panel, give it data in Chart Data, choose its type in the gallery, set its series in Select Data, format it with Chart Elements and Format Axis, and import charts from Excel.
In the next chapter, you link charts and tables to live spreadsheet cells, connect the board to the model and add clipart.