פרקי הקורס
הדרכה · מסלול 1. תחילת עבודה · פרק 1.1 מתוך 8
1.1 סביבת העבודה של Holarch 5:34
מתמצאים במודל גמור.
מציג את Holarch 2.21.
מה תלמדו
- ליצור את פרויקט ההדגמה CubeSat EO-1 מ“ניהול פרויקטים”
- לנווט בקבוצות מחזור החיים של פס הניווט ולפתוח דף מדף הסקירה הכללית של קבוצה
- לבחון את המאפיינים ואת העקיבות של פריט בחלונית המאפיינים, במסד הנתונים ובתצוגת הפריט
- למצוא פריט, דף או פקודה לפי שם עם ⌘K / Ctrl+K
- לפתוח את העזרה של הדף הנוכחי ואת הרשימה “דורש תשומת לב”
סיור בסביבת העבודה של Holarch על פרויקט ההדגמה CubeSat EO-1: ניהול פרויקטים, דף הבית, פס הניווט וקבוצות מחזור החיים שלו, דפי סקירה כללית, מסמכים וחלונית המאפיינים, מסד הנתונים, תצוגת הפריט וכרטיסיות העורך, חיפוש עם Command K, רשימת הבעיות, שמירה וביטול פעולה, ועזרה בכל דף.
קובצי פרויקט
הפרק הזה משתמש בפרויקט ההדגמה: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← CubeSat (הנדסת מערכות מודרכת).
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עשו זאת בעצמכם ב-Holarch, על פרויקט ההדגמה CubeSat EO-1.
- יוצרים את הדגמת EO-1: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← CubeSat (הנדסת מערכות מודרכת).
- בדף בית קוראים את הכרטיסים דורש תשומת לב, ואז לוחצים על אימות בפס הניווט ופותחים את מרכז הבדיקות מדף הסקירה הכללית שלו.
- לוחצים על מסד הנתונים בתחתית פס הניווט, לוחצים על + מסנן ובוחרים את המחלקה Test Case. בוחרים את TC-04 Pointing Accuracy Test וקוראים את ה-עקיבות שלו בחלונית המאפיינים: איזו דרישה הוא מאמת.
- לוחצים לחיצה כפולה על השורה של TC-04 כדי לפתוח אותה בתצוגת פריט, ואז לוחצים ⌘K / Ctrl+K, מקלידים
batteryולוחצים Enter על 1.3.2 Battery Pack. עוברים בין שתי כרטיסיות העורך. - לוחצים על דגל “דורש תשומת לב” בסרגל העליון ופותחים את הרשומה בדיקות שנכשלו. בדף הזה לוחצים על ? בסרגל העליון וקוראים את חלונית העזרה.
- להדרכה מודרכת עם בדיקה, מריצים את המדריך 1 Getting Around (עזרה ← מדריכים).
סיימתם כש-TC-04 ו-1.3.2 Battery Pack פתוחים בכרטיסיות עורך משלהם ואתם יכולים לנקוב בדרישה ש-TC-04 מאמת.
בדיקה עצמית
- משנים את התיאור של דרישה במסד הנתונים. האם מפרט דרישות המערכת עדיין מציג את הטקסט הישן?
- מתי כדאי להשתמש ב-⌘K / Ctrl+K במקום בפס הניווט?
- למה אין לחצן שמירה?
הצגת התשובות
משנים את התיאור של דרישה במסד הנתונים. האם מפרט דרישות המערכת עדיין מציג את הטקסט הישן?
לא. יש עותק אחד של כל פריט; המסמך, מסד הנתונים, הדיאגרמות וחלונית המאפיינים מציגים כולם את אותו פריט, ולכן העריכה מופיעה בכל מקום.
מתי כדאי להשתמש ב-⌘K / Ctrl+K במקום בפס הניווט?
כשיודעים את השם או המספר של מה שמחפשים. ⌘K / Ctrl+K מוצא פריטים, דפים, מסמכים, דיאגרמות ופקודות לפי שם; פס הניווט משמש לעיון לפי שלב במחזור החיים.
למה אין לחצן שמירה?
Holarch שומר כל שינוי ברגע שהוא נעשה ומציג את מצב השמירה בסרגל העליון. כל שינוי הוא צעד ביטול אחד, כך ש-⌘Z / Ctrl+Z מבטל אותו.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Welcome to Holarch Training. This first chapter is a tour of the workspace: where things are, how to move around, and how to read what each part of the window tells you. All you need is a browser.
By the end of it, you will know the parts of the window that every later chapter uses: the rail, the top bar, the editor tabs, the inspector, and the Help.
Manage Projects and the demo
After you sign in, Holarch opens Manage Projects. It lists the projects you own and the projects others have shared with you. A project holds one model of one system: its requirements, functions, parts, tests and documents.
On screen: Manage Projects.
To learn the workspace, start with the demo project. Click Project Files, then New Demo Project, and choose the CubeSat. Holarch builds a complete model of a small earth observation satellite, the CubeSat EO-1.
On screen: Project Files ▾ → New Demo Project ▸ CubeSat.
Home
The project opens on its Home page. Needs attention, at the top, counts the open problems: links to review, overdue to-be-determined items, failing tests, measures over their limits, high risks and model check findings.
On screen: Home: Needs attention.
Below it, the Lifecycle cards give the main number of each stage, such as how many requirements are approved and how many are verified. Next actions lists the most urgent work.
On screen: Home: Lifecycle, Next actions.
The rail and overview pages
On the left is the rail. Its groups follow the systems engineering lifecycle from top to bottom: needs and requirements, behavior, architecture, interfaces, verification, risk and decisions, and plan and deliver.
On screen: The rail's lifecycle groups.
Below the groups are the tools that work across the whole project: the Database, Diagrams, the Trash, Settings with the project's Schema, Help, and Manage Projects to switch projects.
On screen: The rail tools.
Click a group to open its overview page. Needs and Requirements shows live numbers for the stage, a card for each of its pages, and its recent diagrams. The group's pages also appear under it in the rail.
On screen: Needs & Requirements overview.
Documents and the inspector
Click Documents, and open the system requirements specification.
On screen: Documents → the SRS.
The document opens in an editor tab under the top bar. The outline on the left lists its sections, and the full text is in the middle, numbered and nested.
On screen: The document editor and its outline.
Click a requirement's number in the text. The inspector on the right shows the selected item in one panel: the item itself, its attributes, its trace to the rest of the model, its discussion and its details.
On screen: Select 3.1 Orbit Average Power; the inspector.
Click Trace at the top of the inspector. This requirement is satisfied by part of the power system and has a test case that verifies it. These links are what make the model more than a document.
On screen: Inspector → Trace.
The Database and the Item View
Now click Database at the bottom of the rail. It lists every item of the model in one table, whichever page it was created on.
On screen: Database.
Filters narrow the table. Click Filter, and choose the class Requirement. The table shows only requirements: the same ones you just saw in the document.
On screen: + Filter → Class → Requirement.
Select a row, and the same inspector opens. There is only one copy of each requirement, so an edit here also changes the document.
On screen: Select a row; the inspector.
Double-click a row to open the item in the Item View. It shows everything about one item on one page: its attributes, relationships, comments and history.
On screen: Double-click → Item View.
Each document, diagram or item you open gets an editor tab. Tabs stay open while you work, and after a reload. Click the document's tab to go back to it.
On screen: Editor tabs → back to the SRS.
Search, problems and Help
To jump to anything by name, press Command K, or click Search in the top bar. Type deploy.
On screen: Search → deploy.
Results include pages, items, documents and diagrams. Press Enter to open the function Deploy Solar Arrays in the Item View, in another tab.
On screen: Enter → Deploy Solar Arrays.
The warning icon in the top bar counts the open problems. Click it for the list. Each entry opens the page that holds the data, so you can fix it there.
On screen: Problems list.
Holarch saves every change as you make it, and the top bar shows the save status. There is no Save button. Every change is one undo step, with Command Z or the Undo button.
On screen: Save status, Undo and Redo.
Your account menu is at the top right. It holds your account settings, preferences, AI settings, Send Feedback, and Sign Out.
On screen: Account menu.
When you are not sure what a page does, click the question mark in the top bar. It opens the Help for the page you are on in a side panel, with steps and examples.
On screen: ? → Help side panel.
Help in the rail opens the Help Center, the keyboard shortcuts, a primer on the modeling language, and guided tutorials. The Help Center also holds the videos, including this course.
On screen: Help in the rail.
Recap
Let's recap. You opened the demo project, moved through the lifecycle with the rail, read items in the inspector, used the Database and the Item View, searched with Command K, and found Help for every page.
In the next chapter, you create your own project and its first items. See you there.