פרקי הקורס
הדרכה · מסלול 9. יסודות SysML v2 · פרק 9.4 מתוך 8
9.4 מצבים ומעברים 3:51
כותבים מכונת מצבים עם טריגרים, תנאים ופעולות מצב, ומשרטטים מעבר מתוזמן.
מציג את Holarch 2.22.
מה תלמדו
- להגדיר אותות והגדרת מצב עם מצב התחלתי
- לכתוב מעברים עם טריגר, תנאי ויעד, בצורה המקוצרת וכמעברים בעלי שם
- לתת למצב פעולות entry, do ו-exit
- לשרטט מעבר בתצוגת מעברי מצבים ולהגדיר את השם והטריגר שלו
- לתת לחלק להציג (exhibit) הגדרת מצב
כותבים מכונת מצבים של SysML v2 ב-Holarch, לפי המדריך States and Transitions של SysML v2 על פרויקט Hybrid Car קטן: אותות כהגדרות, הגדרת מצב עם מצב התחלתי, מעברים עם טריגרים ותנאים, פעולות entry, do ו-exit, מעברים בעלי שם, תצוגת מעברי מצבים עם מעבר מתוזמן שמשורטט עליה, ומכונית שמציגה את המצבים. SysML הוא סימן מסחרי רשום של Object Management Group, Inc.
קובצי פרויקט
- פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.
תרגול
עושים את זה בעצמכם ב-Holarch, על פרויקט ההדגמה Hybrid Car (SysML v2).
- פותחים את פרויקט ההדגמה Hybrid Car (יוצרים אותו אם צריך: ניהול פרויקטים ← קובצי פרויקט ▾ ← פרויקט הדגמה חדש ← Hybrid Car (SysML v2)), פותחים את מודל ← עורך ואת החבילה
VehicleBehavior. - אחרי
attribute def Unplug;מוסיפיםattribute def FaultDetected;. - לפני הסוגר המסולסל הסוגר של
state def PowertrainStatesמוסיפיםstate limpHome { entry action warnDriver; do action driveLimited; }ו-transition limpStop first limpHome accept StopRequest then off;. - פותחים את התנהגות ← מכונות מצבים, לוחצים על + דיאגרמה חדשה, בוחרים
PowertrainStatesתחת מציג ולוחצים על יצירה. - בוחרים את
electricוגוררים מהידית שלו אלlimpHome; משחררים על מעבר. בחלונית המעבר מזינים את השםelectricFaultואת הטריגרFaultDetected, ואז לוחצים על הצגה בטקסט.
סיימתם כש-PowertrainStates מכיל את limpHome, את limpStop ואת המעבר electricFault שמקבל את FaultDetected, והסטטוס מתחת לעורך מדווח שאין בעיות.
בדיקה עצמית
- מה הופך את
offלמצב ההתחלתי שלPowertrainStates? - אחרי
state off;מגיעaccept StartRequest if charge > 20 then electric;. מהם הטריגר, התנאי (guard), המקור והיעד שלו? - מתי רצות פעולות ה-entry, ה-do וה-exit של מצב?
- מה אומר
exhibit state powertrainStates : PowertrainStates;ב-DrivenCar?
הצגת התשובות
מה הופך את
offלמצב ההתחלתי שלPowertrainStates?entry; then off;: אחרי ה-entry בא רצף אלoff, ולכן מכונת המצבים מתחילה שם. התצוגה משרטטת אותו כנקודה.אחרי
state off;מגיעaccept StartRequest if charge > 20 then electric;. מהם הטריגר, התנאי (guard), המקור והיעד שלו?טריגר: האות StartRequest. תנאי:
charge > 20. יעד:electric. הצורה המקוצרת מתחילה במצב שאחריו היא באה,off.מתי רצות פעולות ה-entry, ה-do וה-exit של מצב?
פעולת ה-entry רצה כשנכנסים למצב, פעולת ה-do כל עוד המצב פעיל, ופעולת ה-exit כשיוצאים מהמצב.
מה אומר
exhibit state powertrainStates : PowertrainStates;ב-DrivenCar?שהמכונית מציגה (exhibits) את מכונת המצבים הזו: למכונית יש שימוש ב-PowertrainStates, ולכן המצבים שלו הם המצבים של המכונית.
קריאה נוספת
תמליל
הצגת התמליל (הקריינות ומה שמוצג על המסך)
Introduction
Chapter four: states and transitions. A state machine says how a system reacts to events, and what it does in each state.
In this chapter you write signals and a state machine with triggers, guards and state actions, draw a timed transition in a view, and let the car exhibit the states.
Start the tutorial
Start the tutorial States and Transitions from Project Files, Start a Tutorial. Its starter project holds the powertrain package with the car, and nothing else yet.
On screen: Project Files ▾ → Start a Tutorial… → SysML v2: States and Transitions → Start; Model → Editor.
The state machine
A state machine reacts to signals, and in SysML v2 they are plain definitions. After the imports, define four: start request, stop request, plug in and unplug.
On screen: After the imports: four attribute defs.
Below the signals, write the state definition. Charge is an input that the transitions read. Entry, then off, makes off the initial state.
On screen: Below Unplug: state def PowertrainStates with three states.
Transitions and state actions
A transition has a trigger, a guard and a target. After the off state, a start request goes to electric when the charge is above twenty, and to hybrid otherwise. This short form starts at the state it follows.
On screen: After state off;: accept StartRequest if charge > 20 then electric; accept StartRequest then hybrid;
Now give the electric state its actions. Replace its line with a body: the entry action runs when the state is entered, the do action while it is active, and the exit action when it is left.
On screen: Select state electric; and type its body.
After the electric state, the powertrain switches to hybrid when the charge drops below fifteen, and turns off on a stop request. The hybrid state turns off on a stop request too.
On screen: After electric's closing brace: if charge < 15 then hybrid; accept StopRequest then off; after state hybrid;: accept StopRequest then off;
Before the closing brace of the state definition, add the charging state and two named transitions. A named transition says where it starts, with first.
On screen: After hybrid's stop transition: state charging; transition plugIn; transition unplugged.
The State Transition View
Open Behavior, then State Machines, and click New Diagram. Keep State Transition View, choose the powertrain states under Shows, and click Create.
On screen: Behavior → State Machines → + New Diagram; Shows: PowertrainBehavior::PowertrainStates; Create.
States show their entry, do and exit actions, and the dot marks the initial state. Each transition reads its trigger, the guard in square brackets, then a slash and the effect.
On screen: The view.
Draw a timed transition
A full charge takes half an hour, then the car switches off. Select the charging state, and drag from its handle to the off state. The drop makes a transition.
On screen: Select charging; drag its handle onto off.
In the transition panel, name it charged, and set its trigger to after thirty minutes.
On screen: Transition panel: Name charged; Trigger after 30 [min].
Open the Editor. The new transition is in the state definition: named charged, it accepts after thirty minutes, and goes to off.
On screen: Model → Editor: the transition charged.
Exhibit
Last, let the car exhibit the states. Inside the car, after its doc line, add an exhibit state usage. The state machine now belongs to the car.
On screen: In part def Car after doc: exhibit state powertrainStates : PowertrainStates;
Recap
Every step is ticked off. Click Mark as Done.
On screen: Step panel → Mark as Done.
Let's recap. You defined signals, wrote a state definition with an initial state, transitions with triggers and guards, and state actions, drew a timed transition that Holarch wrote into the text, and let the car exhibit the states.
Next, requirements say what the car must do, in a form the model can check.