Holarch
פרקי הקורס

הדרכה · מסלול 6. מעבר ל-Holarch · פרק 6.5 מתוך 5

6.5 ניקוי אחרי ייבוא 2:40

מוצאים כפילויות ודרישות חלשות, מתקנים אותן, מריצים את בדיקות המודל ומחברים את מה שנכנס בנפרד.

מציג את Holarch 2.13.

→ 6.4 מודלים מכלים אחרים · כל הפרקים

מה תלמדו

  • להריץ את בדיקת האיכות על מסמך מיובא ולקרוא את הממצאים שלה
  • להסיר דרישה כפולה ולנסח מחדש דרישה מעורפלת
  • להריץ את בדיקות המודל כדי למצוא קצוות פתוחים בכל המודל
  • לחבר דרישות מיובאות לנכסים שמקיימים אותן

מנקים את המודל Plant Inspection Drone אחרי הייבוא שלו: מריצים את בדיקת איכות הדרישות כדי למצוא דרישה כפולה ודרישה חלשה, מוחקים אחת ומנסחים מחדש את השנייה, מריצים את בדיקות המודל ועוקבים מהדרישות המיובאות אל החלקים המיובאים שמקיימים אותן.

קובצי פרויקט

  • פרויקט התחלה (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)
  • פרויקט גמור (.holarch.json; ניהול פרויקטים ← קובצי פרויקט ▾ ← ייבוא פרויקט (.json)…)

הסרטון מוצג מ-holarch.app; ראו את מדיניות הפרטיות.

תרגול

עשו זאת בעצמכם ב-Holarch, על פרויקט ההדגמה CubeSat EO-1.

  1. פותחים את הפרויקט EO-1 Import Practice מהפרקים הקודמים (או מייבאים קובץ CSV של הדרישות של EO-1 כמו בפרק 2).
  2. פותחים את צרכים ודרישות ← איכות, בוחרים אחד מהמסמכים המיובאים בסרגל ההיקף ולוחצים על בדיקת איכות.
  3. אם ייבאתם את אותן דרישות פעמיים (Word ו-ReqIF), מסמנים את השורה של דרישה כפולה במסד הנתונים ומוחקים אותה עם מחיקת הפריט… בסרגל הפעולות המרובות. מנסחים מחדש את 2.5 Safe Mode Recovery כך שתהיה מדידה, ואז בודקים שוב את האיכות.
  4. פותחים את אימות ← בדיקות המודל ופותחים את הכלל Requirement.8, דרישות עלה ששום ישות תכן לא עונה עליהן.
  5. אם ייבאתם גם את הנכסים (פרק 4), בוחרים את 2.1 Pointing Accuracy, ובעקיבות מוסיפים satisfied by עם + ← קישור פריט קיים… אל ADCS. מריצים שוב את בדיקות המודל.

סיימתם כש-2.5 מקבלת ציון גבוה יותר מקודם ו-Requirement.8 כבר לא מציג את 2.1.

בדיקה עצמית

  1. על מה בדיקת האיכות מסתכלת, ועל מה בדיקות המודל מסתכלות?
  2. למה ציון האיכות האוטומטי אף פעם לא עולה מעל 78%?
  3. למה לחבר דרישות וחלקים מיד אחרי מעבר?
הצגת התשובות
  1. על מה בדיקת האיכות מסתכלת, ועל מה בדיקות המודל מסתכלות?

    בדיקת האיכות נותנת ציון לניסוח של כל דרישה מול התכונות של דרישה טובה. בדיקות המודל מסתכלות על המודל כולו ומחפשות פערים כמו דרישות ששום דבר לא מקיים, פריטים שעומדים לבד או פעולות שאף אחד לא מבצע.

  2. למה ציון האיכות האוטומטי אף פעם לא עולה מעל 78%?

    Correct ו-Feasible דורשות שיקול דעת של אדם, ולכן הבדיקה אף פעם לא מסמנת אותן כמתקיימות. אתם מסמנים אותן אחרי סקירת הדרישה.

  3. למה לחבר דרישות וחלקים מיד אחרי מעבר?

    הן מגיעות מקבצים שונים בלי קישורים ביניהן. כל קישור satisfied by מזין מאז את העקיבות, הכיסוי ובדיקות המודל.

קריאה נוספת

תמליל

הצגת התמליל (הקריינות ומה שמוצג על המסך)

Introduction

Chapter five: cleaning up after import. Imported data carries its old problems along, and the pieces arrive from different files unconnected. A short clean-up pass fixes both.

This is the last chapter of the migration track.

Quality check

Open Needs and Requirements, then Quality. Choose the imported tracker, and click Check Quality. Every requirement is scored against the qualities of a good requirement, and the findings say what to fix.

On screen: Quality → Document: PID Requirements Tracker → Check Quality.

Two findings stand out. Requirement 2.4 says the same thing as 2.1, in slightly different words: a duplicate from the old tracker. And 3.2 is vague: fast and easy to use cannot be measured, and the and joins two requirements in one.

On screen: Findings for 2.4 and 3.2.

Fix the findings

Remove the duplicate. In the Database, check the row of Crack Imaging, click Delete Entity in the bulk bar, and confirm.

On screen: Database → check 2.4 → Delete Entity… → Delete.

Then rewrite the vague one. Select Easy Operation, click its description, and replace it with something testable.

On screen: Easy Operation → Item → Description.

Run the quality check again. The duplicate is gone, and the rewritten requirement scores better.

On screen: Quality → Check Quality again.

Model checks

The model checks look at the whole model, not just the wording. Open Verification, then Model Checks. They list loose ends, such as requirements nothing satisfies yet, and each finding links to the item.

On screen: Verification → Model Checks.

Connect what came in

The requirements and the parts came from different files, so nothing connects them yet. Connect them. Select Crack Resolution in the Database. In Trace, click the plus on satisfied by, choose Link existing, and pick the camera payload.

On screen: 2.1 → Trace → satisfied by + → Link existing… → Camera Payload.

Wall Thickness is satisfied by the ultrasonic probe, in the same way. Each link you add now feeds traceability, coverage and the model checks from here on.

On screen: 2.2 → Trace → satisfied by + → Link existing… → Ultrasonic Probe.

Recap

Let's recap. You ran the quality check, removed a duplicate, rewrote a weak requirement, ran the model checks, and connected the imported requirements to the imported parts.

That completes Migrating to Holarch. You can now plan a migration, bring in spreadsheets, Word documents, ReqIF files and models from other tools, and clean up what arrives.

On screen: Track complete card, then end card.