Holarch
课程章节

培训 · 课程 5. 团队和管理 · 第 5.2 章,共 6 章

5.2 角色、评审者和审批 1:56

为每个人分配合适的角色,并通过免费评审者批准需求。

演示 Holarch 1.7。

您将学到

  • 为每个人选择合适的项目角色(所有者、编辑者、评审者或查看者)
  • 在“共享”对话框中邀请评审者并更改成员的角色
  • 在“审批”页面上批准、拒绝和重新打开需求
  • 说明需求文本更改时审批会怎样

团队的项目角色:所有者、编辑者、评审者和查看者;邀请免费评审者;更改成员的角色;以及需求的评审循环:In Review、“审批”页面、批准、拒绝和重新打开,并记录批准人和时间。

项目文件

  • 起始项目 (.holarch.json;管理项目 → 项目文件 ▾ → 导入项目 (.json)…)

视频从 holarch.app 播放;参见隐私政策。

练习

在 Holarch 中基于 CubeSat EO-1 演示项目亲自完成此操作。

  1. 打开您的 EO-1 演示项目(如果没有,请创建:管理项目 → 项目文件 ▾ → 新建演示项目 → CubeSat(引导式系统工程))。单击 共享,将第二个电子邮件地址邀请为 评审者,然后单击 邀请。
  2. 选择需求 2.4 Target Slew(状态为 Draft),在属性面板的 工作流 组中将其 Status 设为 In Review。
  3. 打开 需要与需求 → 审批,单击 2.4,然后单击 批准。接着单击 3.4 Bus Regulation,单击 拒绝…,并输入理由 Name the source of the 2% tolerance。
  4. 编辑 2.4 Target Slew 的描述:将 60 seconds 改为 45 seconds。
  5. 再次打开 审批,在 3.4 Bus Regulation 上单击 重新打开。

当 2.4 Target Slew 带着“审批后文本已更改”的说明回到审批列表中,且 3.4 Bus Regulation 再次处于 In Review 状态时,即完成练习。

自测

  1. 为什么要将签核需求的人员邀请为评审者而不是编辑者?
  2. 有人编辑已批准需求的描述时会发生什么?
  3. 您的项目群要求在已批准的需求可以更改之前,须有三位指定审批人和一个变更委员会。“批准”按钮是否足够?
显示答案
  1. 为什么要将签核需求的人员邀请为评审者而不是编辑者?

    评审者可以阅读、评论以及批准或拒绝需求,但不能编辑模型。在所有方案中评审者都免费,且不计入项目的编辑者名额。

  2. 有人编辑已批准需求的描述时会发生什么?

    它回到 In Review 状态,并附有“审批后文本已更改”的说明,因此审批始终与被批准的措辞一致。更改其他属性不会使其重新打开。

  3. 您的项目群要求在已批准的需求可以更改之前,须有三位指定审批人和一个变更委员会。“批准”按钮是否足够?

    不够。“批准”只是在需求状态上记录一项决定。必需审批人、变更委员会及其规则属于变更请求,而这些审批规则是 Team 方案的一部分。

延伸阅读

文字稿

显示文字稿 (旁白和屏幕内容)

Introduction

Chapter two: roles, reviewers and approvals. Organizations group people, but each project still decides what each person may do in it.

Roles

Every project member has one of four roles.

On screen: Roles card.

Invite a reviewer

Open Share. Invite the quality lead as a Reviewer. Reviewers cost nothing on any plan, so everyone who signs off on requirements can be one.

On screen: Share → email → Reviewer → Invite.

Roles can change later: an owner picks a different role next to the person's name, and the change applies at once. Click Done.

On screen: Members list → Done.

Approve a requirement

Reviewers work on requirements whose status is In Review. Open Needs and Requirements, then Approvals. It lists every requirement waiting for a decision. Here, Flight Endurance.

On screen: Needs & Requirements → Approvals.

Select it. The inspector shows the requirement and the decision buttons: Approve, Reject, or Reopen. Click Approve.

On screen: Select Flight Endurance → Approve.

Holarch records who approved it and when, and the status becomes Approved. If someone later changes the requirement's text, it goes back to In Review automatically, so an approval always matches the words that were approved.

On screen: Approved by, date; status Approved.

Reject asks for an optional reason, which is shown with the decision. Reopen sends an approved or rejected requirement back for review.

On screen: Reject and Reopen.

Recap

Let's recap. Each project member has one role: owner, editor, reviewer or viewer. Reviewers and viewers are free. Requirements in review are listed on the Approvals page, and every approval records who and when.

Next, you protect the team's accounts: passkeys, two-step sign-in, and requiring it for the organization.