Holarch
コースのチャプター

トレーニング · トラック 5. チームと管理 · チャプター 5.2(全 6 チャプター)

5.2 ロール、レビュー担当者、承認 1:56

各人に適切なロールを与え、無料のレビュー担当者で要求を承認します。

Holarch 1.7 の画面です。

学習内容

  • 各人に適切なプロジェクトロール(オーナー、編集者、レビュー担当者、閲覧者)を選ぶ
  • 共有ダイアログでレビュー担当者を招待し、メンバーのロールを変更する
  • 承認ページから要求を承認、却下、再オープンする
  • 要求のテキストが変わったときに承認がどうなるかを説明する

チームのプロジェクトロールを扱います。オーナー、編集者、レビュー担当者、閲覧者、無料のレビュー担当者の招待、メンバーのロールの変更、そして要求のレビューの流れです。In Review、承認ページ、承認、却下、再オープン、そして誰がいつ承認したかを扱います。

プロジェクトファイル

  • 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)

動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。

演習

CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。

  1. EO-1 デモプロジェクトを開きます(ない場合は作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング))。共有をクリックし、2 つ目のメールアドレスをレビュー担当者として招待して、招待をクリックします。
  2. 要求 2.4 Target Slew(ステータスは下書き)を選択し、インスペクターのワークフローグループでそのステータスを In Review に設定します。
  3. ニーズと要求 → 承認を開き、2.4 をクリックして承認をクリックします。次に 3.4 Bus Regulation をクリックし、却下…をクリックして、理由 Name the source of the 2% tolerance を入力します。
  4. 2.4 Target Slew の説明を編集し、60 seconds を 45 seconds に変更します。
  5. もう一度承認を開き、3.4 Bus Regulation で再オープンをクリックします。

2.4 Target Slew が「承認後にテキストが変更されました」のメモ付きで承認の一覧に戻り、3.4 Bus Regulation が再び In Review になっていれば完了です。

確認問題

  1. 要求にサインオフする人を、編集者ではなくレビュー担当者として招待するのはなぜですか?
  2. 承認済みの要求の説明を誰かが編集すると、どうなりますか?
  3. あなたのプログラムでは、承認済みの要求を変更する前に、指名された 3 人の承認者と変更管理委員会が必要です。承認ボタンだけで十分ですか?
解答を表示
  1. 要求にサインオフする人を、編集者ではなくレビュー担当者として招待するのはなぜですか?

    レビュー担当者は、モデルを編集することなく、閲覧、コメント、要求の承認や却下ができます。どのプランでも無料で、プロジェクトの編集者の上限に数えられません。

  2. 承認済みの要求の説明を誰かが編集すると、どうなりますか?

    「承認後にテキストが変更されました」のメモとともに In Review に戻ります。これにより、承認は常に承認された文言と一致します。他の属性を変更しても再オープンされません。

  3. あなたのプログラムでは、承認済みの要求を変更する前に、指名された 3 人の承認者と変更管理委員会が必要です。承認ボタンだけで十分ですか?

    いいえ。承認は要求のステータスに 1 つの判断を記録するものです。必須の承認者、変更管理委員会とそのルールは変更要求に属し、それらの承認ルールは Team プランの機能です。

関連資料

トランスクリプト

トランスクリプトを表示 (ナレーションと画面の内容)

Introduction

Chapter two: roles, reviewers and approvals. Organizations group people, but each project still decides what each person may do in it.

Roles

Every project member has one of four roles.

On screen: Roles card.

Invite a reviewer

Open Share. Invite the quality lead as a Reviewer. Reviewers cost nothing on any plan, so everyone who signs off on requirements can be one.

On screen: Share → email → Reviewer → Invite.

Roles can change later: an owner picks a different role next to the person's name, and the change applies at once. Click Done.

On screen: Members list → Done.

Approve a requirement

Reviewers work on requirements whose status is In Review. Open Needs and Requirements, then Approvals. It lists every requirement waiting for a decision. Here, Flight Endurance.

On screen: Needs & Requirements → Approvals.

Select it. The inspector shows the requirement and the decision buttons: Approve, Reject, or Reopen. Click Approve.

On screen: Select Flight Endurance → Approve.

Holarch records who approved it and when, and the status becomes Approved. If someone later changes the requirement's text, it goes back to In Review automatically, so an approval always matches the words that were approved.

On screen: Approved by, date; status Approved.

Reject asks for an optional reason, which is shown with the decision. Reopen sends an approved or rejected requirement back for review.

On screen: Reject and Reopen.

Recap

Let's recap. Each project member has one role: owner, editor, reviewer or viewer. Reviewers and viewers are free. Requirements in review are listed on the Approvals page, and every approval records who and when.

Next, you protect the team's accounts: passkeys, two-step sign-in, and requiring it for the organization.