Holarch
課程章節

培訓 · 第 5 單元:團隊與管理 · 第 5.2 章,共 6 章

5.2 角色、審查者與核准 1:56

為每個人指定正確的角色,並由免費的審查者核准需求。

展示 Holarch 1.7。

您將學到

  • 為每個人選擇正確的專案角色(擁有者、編輯者、審查者或檢視者)
  • 在「共用」對話方塊中邀請審查者並變更成員的角色
  • 從核准頁面核准、拒絕與重新開啟需求
  • 說明當需求的文字變更時,核准會怎樣

團隊的專案角色:擁有者、編輯者、審查者與檢視者;邀請免費審查者;變更成員的角色;以及需求的審查循環:In Review、核准頁面、核准、拒絕與重新開啟,並記錄由誰在何時核准。

專案檔案

  • 起始專案 (.holarch.json;管理專案 → 專案檔案 ▾ → 匯入專案 (.json)…)

影片從 holarch.app 播放;請參閱隱私權政策。

練習

在 Holarch 中於 CubeSat EO-1 示範專案上親自操作。

  1. 開啟您的 EO-1 示範專案(如果還沒有,請建立:管理專案 → 專案檔案 ▾ → 新增示範專案 → CubeSat(引導式系統工程))。按一下共用,以審查者身分邀請第二個電子郵件地址,然後按一下邀請。
  2. 選取需求 2.4 Target Slew(狀態為 Draft),並在屬性面板的工作流程群組中將其狀態設為 In Review。
  3. 開啟需要與需求 → 核准,按一下 2.4,然後按一下核准。接著按一下 3.4 Bus Regulation,按一下拒絕…,並輸入理由 Name the source of the 2% tolerance。
  4. 編輯 2.4 Target Slew 的描述:將 60 seconds 改為 45 seconds。
  5. 再次開啟核准,在 3.4 Bus Regulation 上按一下重新開啟。

當 2.4 Target Slew 帶著「核准後文字已變更」的附註回到核准清單,且 3.4 Bus Regulation 再次為 In Review 時,即完成。

自我檢查

  1. 為什麼要將簽核需求的人邀請為審查者,而不是編輯者?
  2. 當有人編輯已核准需求的描述時,會發生什麼事?
  3. 您的計畫要求在已核准的需求變更之前,必須有三位指定核准者與一個變更委員會。只靠「核准」按鈕就夠了嗎?
顯示答案
  1. 為什麼要將簽核需求的人邀請為審查者,而不是編輯者?

    審查者可以閱讀、留言,並核准或拒絕需求,但無法編輯模型。在每個方案中他們都是免費的,且不計入專案的編輯者上限。

  2. 當有人編輯已核准需求的描述時,會發生什麼事?

    它會帶著「核准後文字已變更」的附註回到 In Review,因此核准一定與當初核准的文字相符。變更其他屬性不會重新開啟它。

  3. 您的計畫要求在已核准的需求變更之前,必須有三位指定核准者與一個變更委員會。只靠「核准」按鈕就夠了嗎?

    不夠。「核准」只在需求的狀態上記錄一項決定。必要核准者、變更委員會及其規則屬於變更請求,而這些核准規則是 Team 方案的一部分。

延伸閱讀

文字稿

顯示文字稿 (旁白與畫面內容)

Introduction

Chapter two: roles, reviewers and approvals. Organizations group people, but each project still decides what each person may do in it.

Roles

Every project member has one of four roles.

On screen: Roles card.

Invite a reviewer

Open Share. Invite the quality lead as a Reviewer. Reviewers cost nothing on any plan, so everyone who signs off on requirements can be one.

On screen: Share → email → Reviewer → Invite.

Roles can change later: an owner picks a different role next to the person's name, and the change applies at once. Click Done.

On screen: Members list → Done.

Approve a requirement

Reviewers work on requirements whose status is In Review. Open Needs and Requirements, then Approvals. It lists every requirement waiting for a decision. Here, Flight Endurance.

On screen: Needs & Requirements → Approvals.

Select it. The inspector shows the requirement and the decision buttons: Approve, Reject, or Reopen. Click Approve.

On screen: Select Flight Endurance → Approve.

Holarch records who approved it and when, and the status becomes Approved. If someone later changes the requirement's text, it goes back to In Review automatically, so an approval always matches the words that were approved.

On screen: Approved by, date; status Approved.

Reject asks for an optional reason, which is shown with the decision. Reopen sends an approved or rejected requirement back for review.

On screen: Reject and Reopen.

Recap

Let's recap. Each project member has one role: owner, editor, reviewer or viewer. Reviewers and viewers are free. Requirements in review are listed on the Approvals page, and every approval records who and when.

Next, you protect the team's accounts: passkeys, two-step sign-in, and requiring it for the organization.