コースのチャプター
トレーニング · トラック 7. プロセスに沿った作業 · チャプター 7.4(全 4 チャプター)
7.4 モデルからの技術レビューの実施 2:38
レビューの開始基準を確認し、そのパッケージを準備します。
Holarch 2.13 の画面です。
学習内容
- 正式なライフサイクルで名前の付いたレビューを見つけ、その開始基準を読む
- 「開く」リンクから開始基準を満たす
- レビューのマイルストーンとレビューパッケージを追加する
- ガイドが示すものと、レビューボードが判断するものを説明する
NASA プロジェクトライフサイクルのガイドでシステム要求レビュー(SRR)を準備します。主要な決定ポイント、フェーズのレビューとモデルから読み取られる開始基準、基準の「開く」リンクから実行する品質チェック、テンプレートから作成するシステムズエンジニアリング管理計画書、そしてレビューのマイルストーンとパッケージを扱います。
プロジェクトファイル
- 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
- 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。
演習
CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。
- EO-1 デモプロジェクトを開きます(ない場合は作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング))。計画 → SE プロセスを開き、プロセスで NASA プロジェクトライフサイクルを選びます(または選択してこのプロセスを使用をクリック)。
- Phase B: Preliminary design and technology completion をクリックし、PDR の開始基準を読みます。コンポーネントへの割り当て、インターフェース、TPM、軽減策、検証方法です。
- 満たされていない基準の横にある開くをクリックし、作業を 1 つ行います。たとえば 2.5 Safe Mode Recovery の Verification Method を設定します。
- SE プロセスに戻り、基準の件数を確認します。
- PDR の下でゲートのマイルストーンを追加とレビューパッケージを作成をクリックし、パッケージを開いてどのドキュメントが集められたかを確認します。
PDR にマイルストーンとレビューパッケージが表示され、作業した基準の件数が 1 つ増えていれば完了です。
確認問題
- レビューの開始基準がすべて満たされています。設計は準備できていますか?
- 開始基準をレビューの場ではなくレビューの前に読むのはなぜですか?
- 期待事項から要求へのトレースに関する SRR の基準がまだ未完了です。何が求められていますか?
解答を表示
レビューの開始基準がすべて満たされています。設計は準備できていますか?
必ずしもそうではありません。ガイドはモデルの内容を示すだけで、設計が良いかどうかはレビューボードが判断します。
開始基準をレビューの場ではなくレビューの前に読むのはなぜですか?
Holarch がモデルから読み取るため、チームはまだ作業する時間があるうちに不足しているものを確認できます。
期待事項から要求へのトレースに関する SRR の基準がまだ未完了です。何が求められていますか?
ニーズ(Statement)から、それに応える要求への、traced to によるリンクです。チェックボックスに印を付ける作業ではなく、モデリングの作業です。
関連資料
トランスクリプト
トランスクリプトを表示 (ナレーションと画面の内容)
Introduction
Chapter four: running a technical review from the model. Formal life cycles name their reviews, and each review has entry criteria. Holarch reads the criteria from the model, so the team sees before the review what is ready.
We prepare the System Requirements Review of the Bike-Share Dock, using the NASA project life cycle.
Reviews and entry criteria
Open SE Process, and choose NASA project life cycle in the Process list. The phases run from Pre-Phase A, concept studies, to Phase F, closeout. The diamond on each phase names the key decision point that ends it.
On screen: SE Process → Process ▾ → NASA project life cycle.
Click Phase A, concept and technology development. Its reviews are at the bottom: the System Requirements Review, and the Mission or System Definition Review. Each lists its entry criteria.
On screen: Phase A → Reviews and gates.
Read the SRR's criteria. The system requirements are defined. The requirements have not been quality-checked yet, and there is no systems engineering management plan.
On screen: SRR entry criteria.
Meeting the criteria
Click Open next to the quality criterion. On the Quality page, click the run button to check every requirement. Each one gets a score, and the findings explain what to improve.
On screen: Open → Quality → run the check.
Now the management plan. Go back to SE Process, and click Open next to it. Create a new document of the type Systems Engineering Management Plan Document, from its outline.
On screen: SE Process → Open → + New Document: SEMP.
Back on SE Process, both criteria are met. The one still open, expectations traced to requirements, is real work for the team: it asks for links between the needs and the requirements that answer them.
On screen: SE Process → Phase A: criteria met; tracing still open.
Milestone and package
Click Add Gate Milestone and Create Review Package under the SRR. The package collects the requirements specification and the new management plan for the review board.
On screen: SRR: Add Gate Milestone, Create Review Package.
The guide shows what the model holds. It does not judge whether a design is good: that is the review board's decision. When the review has passed, make the phase current and move on.
On screen: Make Current Phase.
Recap
Let's recap. You switched to the NASA life cycle, read a review's entry criteria, met two of them from their Open links, added the review's milestone and package, and moved the project on.
That completes Track 7. More tracks are at holarch.app slash training.