Holarch
コースのチャプター

トレーニング · トラック 3. 振る舞いとアーキテクチャ · チャプター 3.4(全 6 チャプター)

3.4 インターフェース 2:31

各インターフェースにステータス、オーナー、容量を与え、項目を運ばせて、ICD をエクスポートします。

Holarch 1.27 の画面です。

学習内容

  • インターフェース登録簿を読み、インターフェースステータスで絞り込む
  • インスペクターでインターフェースのステータス、オーナー、媒体、容量を設定する
  • 運ばれる項目にデータレートを与え、容量チェックを確認する
  • インターフェースの ICD を Word にエクスポートし、システムの I² 図を開く

インターフェース登録簿で Bike-Share Dock のインターフェースを管理します。携帯データリンクにステータス、オーナー、容量を設定し、それが運ぶ項目にデータレートを与え、容量チェックを確認し、インターフェース管理文書をエクスポートして、I² 図でドックのインターフェースを確認します。

プロジェクトファイル

  • 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
  • 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)

動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。

演習

CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。

  1. EO-1 デモプロジェクトを開くか、作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング)。
  2. インターフェース → インターフェース登録簿を開き、Proposed カードをクリックします。IF-14.1 Customer Portal の行をクリックします。
  3. インスペクターで、Interface Status を Agreed、Owner を Ground Segment Lead、Medium を HTTPS に設定します。Capacity の 1000 Mbps はそのままにします。
  4. インターフェース → 項目と入出力を開き、Image Product(ポータルが転送する項目)を選択して、Data Rate を 50、Data Rate Units を Mbps に設定します。登録簿に戻り、IF-14.1 の Capacity 列にポインターを合わせてチェック結果を確認します。その行の ICD をクリックして、インターフェース管理文書をエクスポートします。
  5. データベースで 1 EO-1 Spacecraft を選択し、開く場所 ▾ → I2 図を選びます。IF-01 Payload Power Line を含むセルを見つけます。
  6. チェック付きのウォークスルーを行うには、チュートリアル 7「インターフェース」を実行します(ヘルプ → チュートリアル)。

IF-14.1 が Agreed になって Owner と Medium が設定され、容量チェックが OK を示し、ICD の Word ファイルが手元にあれば完了です。

確認問題

  1. Holarch は、コンジットがその項目を運べるかどうかをどのように判断しますか?
  2. データレートをコンジットではなく項目に設定するのはなぜですか?
  3. Proposed や Agreed などのインターフェースステータスは、読み手に何を伝えますか?
  4. I² 図のセルには何が入りますか?
解答を表示
  1. Holarch は、コンジットがその項目を運べるかどうかをどのように判断しますか?

    コンジットが転送するすべての項目の Data Rate(または Size)を合計し、それぞれをコンジットの単位に換算して、合計を Capacity と比較します。結果は OK、Over capacity、Unit mismatch、No capacity のいずれかです。

  2. データレートをコンジットではなく項目に設定するのはなぜですか?

    レートは運ばれるものを表し、同じ項目が複数のコンジットを通ることがあります。各コンジットのチェックは、運ぶ項目を合計して自身の容量と比較します。

  3. Proposed や Agreed などのインターフェースステータスは、読み手に何を伝えますか?

    両端のチームがどこまで進んだかを示します。Draft と Proposed は文書化されているものの双方にはまだ受け入れられておらず、Agreed は双方が受け入れたことを意味し、Baselined が最終段階です。登録簿のカードは各ステータスの件数を示します。

  4. I² 図のセルには何が入りますか?

    その行と列の 2 つの子アセット間のコンジットです。行が起点側、列がもう一方の端です。

関連資料

トランスクリプト

トランスクリプトを表示 (ナレーションと画面の内容)

Introduction

Welcome back. The dock's parts connect through interfaces: a power cable, a data link. This chapter manages them.

You will work in the Interface Register, the list of every interface in the project.

The register

Open Interfaces, then Interface Register. Each conduit from Getting Started is a row: the cellular data link between the kiosk and the back office, and the power cable from the power supply to the charging unit. Neither has a status yet.

On screen: Interfaces → Interface Register.

Status, owner and capacity

Select the cellular data link. In the inspector, set its interface status to Proposed: the kiosk team has written it down, and the back office team has not agreed to it yet. Its owner is the back office team.

On screen: Cellular Data Link → Interface Status: Proposed; Owner.

Give it a capacity: sixty-four kilobits per second, and set its medium to cellular LTE.

On screen: Capacity 64, Units kbit/s, Medium.

Items it carries

Now say what the link carries. The unlock code from Rent a Bike travels from the back office to the kiosk over this link. In its Trace section, show all relations, and under transfers, link Unlock Code.

On screen: Trace → Show all relations → transfers + → Link existing… → Unlock Code.

For the capacity check, the item needs a data rate. Select Unlock Code in the Database and set its data rate: two kilobits per second.

On screen: Database → Unlock Code → Data Rate 2 kbit/s.

The capacity check

Back in the register, the row counts the item it carries, and the capacity check says OK: two kilobits per second on a link of sixty-four. If the items ever carried more than the link can, the check would turn red.

On screen: Register → capacity check.

ICD and I²

The interface control document is one click away. ICD exports this interface as a Word document for the other team, generated from the model, so it agrees with the design.

On screen: ICD → Word export.

For the whole dock, open the I squared diagram. Select the Bike-Share Dock in the Database, choose Open in, then I2 Diagram. The parts sit on the diagonal, and each cell between two parts holds the interfaces that join them.

On screen: Database → S.0 → Open in ▾ → I2 Diagram.

Recap

Let's recap. You read the register, gave an interface a status, an owner and a capacity, related the item it carries, let the capacity check compare them, exported the ICD, and opened the I squared diagram.

Next, you put numbers on Rent a Bike, and simulate it.