Holarch
コースのチャプター

トレーニング · トラック 4. ドキュメントと成果物 · チャプター 4.3(全 5 チャプター)

4.3 Word と Excel の出力 2:10

バナー、表紙、ページ番号。そのまま送れる Word ドキュメントと Excel マトリックス。

Holarch 1.27 の画面です。

学習内容

  • ページ設定で、ドキュメントに独自の区分表示、表紙、ページ番号を付ける
  • 選んだ Word テンプレートでドキュメントを Word にエクスポートする
  • 標準のマトリックスを Excel にエクスポートし、行数とギャップ数を確認する
  • Word エクスポートが改訂履歴と承認をどこから取得するかを説明する

Bike-Share Dock の仕様書をレビュー用に準備します。ページ設定で上下のバナー、表紙、ページ番号を追加し、ライブマトリックスを含むドキュメントを Word にエクスポートし、検証クロスリファレンスマトリックスを Excel にエクスポートします。

プロジェクトファイル

  • 開始時のプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)
  • 完成したプロジェクト (.holarch.json。プロジェクトを管理 → プロジェクトファイル ▾ → プロジェクトをインポート (.json)…)

動画は holarch.app から再生されます。プライバシーポリシーをご覧ください。

演習

CubeSat EO-1 デモプロジェクトを使って、Holarch で実際に操作します。

  1. EO-1 デモプロジェクトを開くか、作成します:プロジェクトを管理 → プロジェクトファイル ▾ → 新しいデモプロジェクト → CubeSat(ガイド付きシステムズエンジニアリング)。
  2. EO-1 System Requirements Specification を開き、納品 ▾ → ページ設定…を選びます。区分表示で独自の区分表示を選び、EO-1 Program Internal などのヘッダーとフッターを設定します。
  3. 表紙にチェックを入れてバージョンを 2.0、作成者を EO-1 Systems Team にし、ページ番号にチェックを入れて適用をクリックします。
  4. 納品 ▾ → レビュー用コピー(Word)を選んでファイルを開きます。各項目の下に属性の列がある横向きのページで、すべてのページに区分表示があります。
  5. 納品 ▾ → トレーサビリティマトリックス…を選びます。RVTM を選び、モデルを SRR Baseline、エクスポート形式をマトリックス(Excel)に設定し、行数とギャップ数を確認してエクスポートをクリックします。

表紙、区分表示、ページ番号付きの Word ファイルと、ギャップが網掛けされた SRR Baseline の Excel RVTM が手元にあれば完了です。

確認問題

  1. ドキュメントにはどの区分表示が使われますか?
  2. Word テンプレートとドキュメントテンプレートの違いは何ですか?
  3. Word エクスポートの改訂履歴と承認の表は、どこから来ますか?
  4. 現在のモデルではなくベースラインからマトリックスをエクスポートするのはなぜですか?
解答を表示
  1. ドキュメントにはどの区分表示が使われますか?

    最も近いものです。ドキュメント自身の区分表示、なければプロジェクトの区分表示、なければ組織の区分表示です。区分表示がない場合は表示されません。

  2. Word テンプレートとドキュメントテンプレートの違いは何ですか?

    ドキュメントテンプレートは内容を埋めます。セクションと初期の表です。Word テンプレートは Word ファイルの体裁を決めます。目次、キャプション番号、ページサイズ、前付けの表です。

  3. Word エクスポートの改訂履歴と承認の表は、どこから来ますか?

    Word テンプレートに含まれている場合(仕様書テンプレートのように)、ドキュメントのベースラインとその承認記録から作成されます。

  4. 現在のモデルではなくベースラインからマトリックスをエクスポートするのはなぜですか?

    レビューボードは合意された内容にコメントを付けます。モデルでベースラインを選ぶと、マトリックスは今日の状態ではなく、そのベースライン時点の状態でエクスポートされます。

関連資料

トランスクリプト

トランスクリプトを表示 (ナレーションと画面の内容)

Introduction

Chapter three: Word and Excel output. Reviewers often want files: a Word document to comment on, and an Excel matrix to mark up. Holarch makes both from the live model.

You will add banners, a cover page and page numbers, export the document to Word, and export a matrix to Excel.

Page Setup

Open the system requirements. In Deliver, choose Page Setup.

On screen: Documents → the SRS → Deliver ▾ → Page Setup….

Choose Own marking, then type a top banner, such as Company Proprietary, and the same at the bottom. Tick Cover page, with version 1.0, prepared by Jordan Lee. Tick page numbers, and click Apply.

On screen: Own marking → banners, cover page, version, prepared by, page numbers → Apply.

The banners now frame the document, and they repeat on every page of its exports. Holarch prints them as you wrote them; it does not check markings.

On screen: Top and bottom banners.

Export to Word

Now open Deliver again, and choose Specification, under Word. This Word template has a table of contents, and it fills the revision history and approvals tables from the document's baselines, which the next chapter creates.

On screen: Deliver ▾ → Specification (Word).

Holarch builds the Word file, and your browser downloads it.

On screen: Card: what the Word file holds.

Export a matrix

For a matrix on its own, open Deliver, and choose Traceability Matrix. Pick the Verification Cross-Reference Matrix, the whole project, and Excel.

On screen: Deliver ▾ → Traceability Matrix… → VCRM, Whole project, Matrix (Excel).

The line under the fields counts the rows and the gaps. Click Export. In the spreadsheet, each planned method is marked with an X, and gaps are shaded, ready for a review board to mark up.

On screen: Row and gap count → Export.

The same dialog makes Word, CSV and web page files. All Exports, in the same menu, lists every export Holarch makes from a document.

On screen: Deliver ▾ menu.

Recap

Let's recap. You added banners, a cover page and page numbers, exported the document to Word, and exported a matrix to Excel.

Next, you freeze the document in a baseline and build a review package.