Holarch
Kurs bölümleri

Eğitim · Kurs 1. Başlarken · Bölüm 1.1 / 8

1.1 Holarch çalışma alanı 5:34

Bitmiş bir modelde yolunuzu bulun.

Holarch 2.21 sürümünü gösterir.

Tüm bölümler · 1.2 İlk projeniz →

Neler öğreneceksiniz

  • CubeSat EO-1 demo projesini Projeleri yönet'ten oluşturun
  • Şeridin yaşam döngüsü gruplarında gezinin ve bir grubun genel bakışından bir sayfa açın
  • Bir öğenin özniteliklerini ve izini özellik panelinde, Veritabanında ve Öğe görünümünde inceleyin
  • ⌘K / Ctrl+K ile bir öğeyi, sayfayı veya komutu adına göre bulun
  • Geçerli sayfanın Yardım'ını ve İlgi bekliyor listesini açın

CubeSat EO-1 demo projesinde Holarch çalışma alanında bir tur: Projeleri yönet, Ana sayfa, şerit ve yaşam döngüsü grupları, genel bakış sayfaları, belgeler ve özellik paneli, Veritabanı, Öğe görünümü ve düzenleyici sekmeleri, Command K ile arama, sorunlar listesi, kaydetme ve geri alma ve her sayfadaki Yardım.

Proje dosyaları

Bu bölüm demo projeyi kullanır: Projeleri yönet → Proje dosyaları ▾ → Yeni demo proje → CubeSat (Rehberli sistem mühendisliği).

Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.

Alıştırma

Bunu Holarch'ta, CubeSat EO-1 demo projesinde kendiniz yapın.

  1. EO-1 demosunu oluşturun: Projeleri yönet → Proje dosyaları ▾ → Yeni demo proje → CubeSat (Rehberli sistem mühendisliği).
  2. Ana sayfa'da İlgi bekliyor kartlarını okuyun, ardından şeritte Doğrulama'ya tıklayın ve genel bakış sayfasından Test Merkezi'ni açın.
  3. Şeridin altındaki Veritabanı'na tıklayın, + Filtre'ye tıklayın ve Test senaryosu sınıfını seçin. TC-04 Pointing Accuracy Test'i seçin ve özellik panelindeki İzleme'sini okuyun: hangi gereksinimi doğruladığını.
  4. Öğe görünümü'nde açmak için TC-04 satırına çift tıklayın, ardından ⌘K / Ctrl+K'ye basın, battery yazın ve 1.3.2 Battery Pack üzerinde Enter'a basın. İki düzenleyici sekmesi arasında geçiş yapın.
  5. Üst çubuktaki İlgi bekliyor bayrağına tıklayın ve Başarısız testler girdisini açın. O sayfada üst çubuktaki ?'ye tıklayın ve Yardım panelini okuyun.
  6. Denetimli bir adım adım anlatım için 1 Getting Around öğreticisini çalıştırın (Yardım → Öğreticiler).

TC-04 ve 1.3.2 Battery Pack kendi düzenleyici sekmelerinde açık olduğunda ve TC-04'ün doğruladığı gereksinimi söyleyebildiğinizde işiniz bitmiştir.

Kendinizi sınayın

  1. Veritabanı'nda bir gereksinimin açıklamasını değiştiriyorsunuz. Sistem gereksinimleri şartnamesi hâlâ eski metni mi gösteriyor?
  2. Şerit yerine ne zaman ⌘K / Ctrl+K kullanırsınız?
  3. Neden Kaydet düğmesi yok?
Yanıtları göster
  1. Veritabanı'nda bir gereksinimin açıklamasını değiştiriyorsunuz. Sistem gereksinimleri şartnamesi hâlâ eski metni mi gösteriyor?

    Hayır. Her öğenin tek bir kopyası vardır; belge, Veritabanı, diyagramlar ve özellik paneli aynı öğeyi gösterir, bu yüzden düzenleme her yerde görünür.

  2. Şerit yerine ne zaman ⌘K / Ctrl+K kullanırsınız?

    İstediğiniz şeyin adını veya numarasını bildiğinizde. ⌘K / Ctrl+K öğeleri, sayfaları, belgeleri, diyagramları ve komutları adlarıyla bulur; şerit ise yaşam döngüsü aşamasına göre göz atmak içindir.

  3. Neden Kaydet düğmesi yok?

    Holarch her değişikliği siz yaptıkça kaydeder ve kayıt durumunu üst çubukta gösterir. Her değişiklik tek bir geri alma adımıdır, bu yüzden ⌘Z / Ctrl+Z onu geri alır.

Daha fazla bilgi

Döküm

Dökümü göster (anlatım ve ekranda görünenler)

Introduction

Welcome to Holarch Training. This first chapter is a tour of the workspace: where things are, how to move around, and how to read what each part of the window tells you. All you need is a browser.

By the end of it, you will know the parts of the window that every later chapter uses: the rail, the top bar, the editor tabs, the inspector, and the Help.

Manage Projects and the demo

After you sign in, Holarch opens Manage Projects. It lists the projects you own and the projects others have shared with you. A project holds one model of one system: its requirements, functions, parts, tests and documents.

On screen: Manage Projects.

To learn the workspace, start with the demo project. Click Project Files, then New Demo Project, and choose the CubeSat. Holarch builds a complete model of a small earth observation satellite, the CubeSat EO-1.

On screen: Project Files ▾ → New Demo Project ▸ CubeSat.

Home

The project opens on its Home page. Needs attention, at the top, counts the open problems: links to review, overdue to-be-determined items, failing tests, measures over their limits, high risks and model check findings.

On screen: Home: Needs attention.

Below it, the Lifecycle cards give the main number of each stage, such as how many requirements are approved and how many are verified. Next actions lists the most urgent work.

On screen: Home: Lifecycle, Next actions.

The rail and overview pages

On the left is the rail. Its groups follow the systems engineering lifecycle from top to bottom: needs and requirements, behavior, architecture, interfaces, verification, risk and decisions, and plan and deliver.

On screen: The rail's lifecycle groups.

Below the groups are the tools that work across the whole project: the Database, Diagrams, the Trash, Settings with the project's Schema, Help, and Manage Projects to switch projects.

On screen: The rail tools.

Click a group to open its overview page. Needs and Requirements shows live numbers for the stage, a card for each of its pages, and its recent diagrams. The group's pages also appear under it in the rail.

On screen: Needs & Requirements overview.

Documents and the inspector

Click Documents, and open the system requirements specification.

On screen: Documents → the SRS.

The document opens in an editor tab under the top bar. The outline on the left lists its sections, and the full text is in the middle, numbered and nested.

On screen: The document editor and its outline.

Click a requirement's number in the text. The inspector on the right shows the selected item in one panel: the item itself, its attributes, its trace to the rest of the model, its discussion and its details.

On screen: Select 3.1 Orbit Average Power; the inspector.

Click Trace at the top of the inspector. This requirement is satisfied by part of the power system and has a test case that verifies it. These links are what make the model more than a document.

On screen: Inspector → Trace.

The Database and the Item View

Now click Database at the bottom of the rail. It lists every item of the model in one table, whichever page it was created on.

On screen: Database.

Filters narrow the table. Click Filter, and choose the class Requirement. The table shows only requirements: the same ones you just saw in the document.

On screen: + Filter → Class → Requirement.

Select a row, and the same inspector opens. There is only one copy of each requirement, so an edit here also changes the document.

On screen: Select a row; the inspector.

Double-click a row to open the item in the Item View. It shows everything about one item on one page: its attributes, relationships, comments and history.

On screen: Double-click → Item View.

Each document, diagram or item you open gets an editor tab. Tabs stay open while you work, and after a reload. Click the document's tab to go back to it.

On screen: Editor tabs → back to the SRS.

Search, problems and Help

To jump to anything by name, press Command K, or click Search in the top bar. Type deploy.

On screen: Search → deploy.

Results include pages, items, documents and diagrams. Press Enter to open the function Deploy Solar Arrays in the Item View, in another tab.

On screen: Enter → Deploy Solar Arrays.

The warning icon in the top bar counts the open problems. Click it for the list. Each entry opens the page that holds the data, so you can fix it there.

On screen: Problems list.

Holarch saves every change as you make it, and the top bar shows the save status. There is no Save button. Every change is one undo step, with Command Z or the Undo button.

On screen: Save status, Undo and Redo.

Your account menu is at the top right. It holds your account settings, preferences, AI settings, Send Feedback, and Sign Out.

On screen: Account menu.

When you are not sure what a page does, click the question mark in the top bar. It opens the Help for the page you are on in a side panel, with steps and examples.

On screen: ? → Help side panel.

Help in the rail opens the Help Center, the keyboard shortcuts, a primer on the modeling language, and guided tutorials. The Help Center also holds the videos, including this course.

On screen: Help in the rail.

Recap

Let's recap. You opened the demo project, moved through the lifecycle with the rail, read items in the inspector, used the Database and the Item View, searched with Command K, and found Help for every page.

In the next chapter, you create your own project and its first items. See you there.