Kurskapitel
Schulung · Reihe 1. Erste Schritte · Kapitel 1.1 von 8
1.1 Der Holarch-Arbeitsbereich 5:34
Sich in einem fertigen Modell zurechtfinden.
Zeigt Holarch 2.21.
Das lernen Sie
- Das Demoprojekt CubeSat EO-1 über „Projekte verwalten“ erstellen
- Durch die Lebenszyklusgruppen der Seitenleiste navigieren und eine Seite über die Übersicht einer Gruppe öffnen
- Attribute und Nachverfolgung eines Elements im Inspektor, in der Datenbank und in der Elementansicht untersuchen
- Mit ⌘K / Ctrl+K ein Element, eine Seite oder einen Befehl nach Namen finden
- Die Hilfe zur aktuellen Seite und die Liste „Erfordert Aufmerksamkeit“ öffnen
Ein Rundgang durch den Holarch-Arbeitsbereich am Demoprojekt CubeSat EO-1: Projekte verwalten, Start, die Seitenleiste und ihre Lebenszyklusgruppen, Übersichtsseiten, Dokumente und der Inspektor, die Datenbank, die Elementansicht und Editor-Registerkarten, Suche mit ⌘K, die Problemliste, Speichern und Rückgängigmachen sowie die Hilfe auf jeder Seite.
Projektdateien
Dieses Kapitel verwendet das Demoprojekt: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → CubeSat (Geführtes Systems Engineering).
Das Video wird von holarch.app abgespielt; siehe Datenschutzerklärung.
Übung
Führen Sie dies selbst in Holarch durch, am Demoprojekt CubeSat EO-1.
- Erstellen Sie die EO-1-Demo: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → CubeSat (Geführtes Systems Engineering).
- Lesen Sie auf Start die Karten Erfordert Aufmerksamkeit, klicken Sie dann in der Seitenleiste auf Verifikation und öffnen Sie Test Center über die Übersichtsseite.
- Klicken Sie unten in der Seitenleiste auf Datenbank, klicken Sie auf + Filter und wählen Sie die Klasse Test Case. Wählen Sie TC-04 Pointing Accuracy Test aus und lesen Sie im Inspektor seine Nachverfolgung: welche Anforderung er verifiziert.
- Doppelklicken Sie auf die Zeile TC-04, um sie in der Elementansicht zu öffnen, drücken Sie dann ⌘K / Ctrl+K, geben Sie
batteryein und drücken Sie die Eingabetaste bei 1.3.2 Battery Pack. Wechseln Sie zwischen den beiden Editor-Registerkarten. - Klicken Sie in der oberen Leiste auf die Markierung „Erfordert Aufmerksamkeit“ und öffnen Sie den Eintrag Fehlgeschlagene Tests. Klicken Sie auf dieser Seite in der oberen Leiste auf ? und lesen Sie den Hilfebereich.
- Für eine geprüfte Schritt-für-Schritt-Anleitung führen Sie Tutorial 1 Getting Around aus (Hilfe → Tutorials).
Sie sind fertig, wenn TC-04 und 1.3.2 Battery Pack in eigenen Editor-Registerkarten geöffnet sind und Sie die Anforderung nennen können, die TC-04 verifiziert.
Selbsttest
- Sie ändern die Beschreibung einer Anforderung in der Datenbank. Zeigt die Systemanforderungsspezifikation noch den alten Text?
- Wann würden Sie ⌘K / Ctrl+K statt der Seitenleiste verwenden?
- Warum gibt es keine Schaltfläche „Speichern“?
Antworten anzeigen
Sie ändern die Beschreibung einer Anforderung in der Datenbank. Zeigt die Systemanforderungsspezifikation noch den alten Text?
Nein. Es gibt von jedem Element genau eine Kopie; das Dokument, die Datenbank, Diagramme und der Inspektor zeigen alle dasselbe Element, daher erscheint die Änderung überall.
Wann würden Sie ⌘K / Ctrl+K statt der Seitenleiste verwenden?
Wenn Sie Namen oder Nummer dessen kennen, was Sie suchen. ⌘K / Ctrl+K findet Elemente, Seiten, Dokumente, Diagramme und Befehle nach Namen; die Seitenleiste dient zum Stöbern nach Lebenszyklusstufe.
Warum gibt es keine Schaltfläche „Speichern“?
Holarch speichert jede Änderung sofort und zeigt den Speicherstatus in der oberen Leiste. Jede Änderung ist ein Rückgängig-Schritt, daher nimmt ⌘Z / Ctrl+Z sie zurück.
Weiterlesen
Transkript
Transkript anzeigen (Erzählung und Bildschirminhalt)
Introduction
Welcome to Holarch Training. This first chapter is a tour of the workspace: where things are, how to move around, and how to read what each part of the window tells you. All you need is a browser.
By the end of it, you will know the parts of the window that every later chapter uses: the rail, the top bar, the editor tabs, the inspector, and the Help.
Manage Projects and the demo
After you sign in, Holarch opens Manage Projects. It lists the projects you own and the projects others have shared with you. A project holds one model of one system: its requirements, functions, parts, tests and documents.
On screen: Manage Projects.
To learn the workspace, start with the demo project. Click Project Files, then New Demo Project, and choose the CubeSat. Holarch builds a complete model of a small earth observation satellite, the CubeSat EO-1.
On screen: Project Files ▾ → New Demo Project ▸ CubeSat.
Home
The project opens on its Home page. Needs attention, at the top, counts the open problems: links to review, overdue to-be-determined items, failing tests, measures over their limits, high risks and model check findings.
On screen: Home: Needs attention.
Below it, the Lifecycle cards give the main number of each stage, such as how many requirements are approved and how many are verified. Next actions lists the most urgent work.
On screen: Home: Lifecycle, Next actions.
The rail and overview pages
On the left is the rail. Its groups follow the systems engineering lifecycle from top to bottom: needs and requirements, behavior, architecture, interfaces, verification, risk and decisions, and plan and deliver.
On screen: The rail's lifecycle groups.
Below the groups are the tools that work across the whole project: the Database, Diagrams, the Trash, Settings with the project's Schema, Help, and Manage Projects to switch projects.
On screen: The rail tools.
Click a group to open its overview page. Needs and Requirements shows live numbers for the stage, a card for each of its pages, and its recent diagrams. The group's pages also appear under it in the rail.
On screen: Needs & Requirements overview.
Documents and the inspector
Click Documents, and open the system requirements specification.
On screen: Documents → the SRS.
The document opens in an editor tab under the top bar. The outline on the left lists its sections, and the full text is in the middle, numbered and nested.
On screen: The document editor and its outline.
Click a requirement's number in the text. The inspector on the right shows the selected item in one panel: the item itself, its attributes, its trace to the rest of the model, its discussion and its details.
On screen: Select 3.1 Orbit Average Power; the inspector.
Click Trace at the top of the inspector. This requirement is satisfied by part of the power system and has a test case that verifies it. These links are what make the model more than a document.
On screen: Inspector → Trace.
The Database and the Item View
Now click Database at the bottom of the rail. It lists every item of the model in one table, whichever page it was created on.
On screen: Database.
Filters narrow the table. Click Filter, and choose the class Requirement. The table shows only requirements: the same ones you just saw in the document.
On screen: + Filter → Class → Requirement.
Select a row, and the same inspector opens. There is only one copy of each requirement, so an edit here also changes the document.
On screen: Select a row; the inspector.
Double-click a row to open the item in the Item View. It shows everything about one item on one page: its attributes, relationships, comments and history.
On screen: Double-click → Item View.
Each document, diagram or item you open gets an editor tab. Tabs stay open while you work, and after a reload. Click the document's tab to go back to it.
On screen: Editor tabs → back to the SRS.
Search, problems and Help
To jump to anything by name, press Command K, or click Search in the top bar. Type deploy.
On screen: Search → deploy.
Results include pages, items, documents and diagrams. Press Enter to open the function Deploy Solar Arrays in the Item View, in another tab.
On screen: Enter → Deploy Solar Arrays.
The warning icon in the top bar counts the open problems. Click it for the list. Each entry opens the page that holds the data, so you can fix it there.
On screen: Problems list.
Holarch saves every change as you make it, and the top bar shows the save status. There is no Save button. Every change is one undo step, with Command Z or the Undo button.
On screen: Save status, Undo and Redo.
Your account menu is at the top right. It holds your account settings, preferences, AI settings, Send Feedback, and Sign Out.
On screen: Account menu.
When you are not sure what a page does, click the question mark in the top bar. It opens the Help for the page you are on in a side panel, with steps and examples.
On screen: ? → Help side panel.
Help in the rail opens the Help Center, the keyboard shortcuts, a primer on the modeling language, and guided tutorials. The Help Center also holds the videos, including this course.
On screen: Help in the rail.
Recap
Let's recap. You opened the demo project, moved through the lifecycle with the rail, read items in the inspector, used the Database and the Item View, searched with Command K, and found Help for every page.
In the next chapter, you create your own project and its first items. See you there.