Розділи курсів
Навчання · Курс 1. Початок роботи · Розділ 1.1 з 8
1.1 Робочий простір Holarch 5:34
Зорієнтуйтеся в готовій моделі.
Показано Holarch 2.21.
Що ви дізнаєтеся
- Створити демопроєкт CubeSat EO-1 з «Керування проєктами»
- Переходити групами життєвого циклу бічної панелі й відкривати сторінку з огляду групи
- Переглядати атрибути й трасування елемента в інспекторі, Базі даних і Поданні елемента
- Знаходити елемент, сторінку чи команду за назвою через ⌘K / Ctrl+K
- Відкривати Довідку для поточної сторінки та список «Потребує уваги»
Огляд робочого простору Holarch на демопроєкті CubeSat EO-1: Керування проєктами, Головна, бічна панель і її групи життєвого циклу, оглядові сторінки, документи й інспектор, База даних, Подання елемента й вкладки редактора, пошук через Command K, список проблем, збереження й відмінення та Довідка на кожній сторінці.
Файли проєкту
У цьому розділі використовується демопроєкт: Керування проєктами → Файли проєкту ▾ → Новий демопроєкт → CubeSat (системна інженерія з посібником).
Відео відтворюється з holarch.app; див. Політику конфіденційності.
Практика
Виконайте це самостійно в Holarch на демопроєкті CubeSat EO-1.
- Створіть демо EO-1: Керування проєктами → Файли проєкту ▾ → Новий демопроєкт → CubeSat (системна інженерія з посібником).
- На Головній прочитайте картки Потребує уваги, потім натисніть Верифікація на бічній панелі й відкрийте Центр тестування з її оглядової сторінки.
- Натисніть База даних унизу бічної панелі, натисніть + Фільтр і оберіть клас Тестовий випадок. Виберіть TC-04 Pointing Accuracy Test і прочитайте його Трасування в інспекторі: яку вимогу він верифікує.
- Двічі клацніть рядок TC-04, щоб відкрити його в Поданні елемента, потім натисніть ⌘K / Ctrl+K, введіть
batteryі натисніть Enter на 1.3.2 Battery Pack. Перемикайтеся між двома вкладками редактора. - Натисніть позначку «Потребує уваги» на верхній панелі й відкрийте пункт Неуспішні тести. На цій сторінці натисніть ? на верхній панелі й прочитайте панель Довідки.
- Для покрокового проходження з перевіркою запустіть посібник 1 Getting Around (Довідка → Посібники).
Завдання виконано, коли TC-04 і 1.3.2 Battery Pack відкриті у власних вкладках редактора і ви можете назвати вимогу, яку верифікує TC-04.
Перевірте себе
- Ви змінюєте опис вимоги в Базі даних. Чи показує специфікація системних вимог досі старий текст?
- Коли варто використовувати ⌘K / Ctrl+K замість бічної панелі?
- Чому немає кнопки «Зберегти»?
Показати відповіді
Ви змінюєте опис вимоги в Базі даних. Чи показує специфікація системних вимог досі старий текст?
Ні. Кожен елемент існує в одному екземплярі; документ, База даних, діаграми й інспектор показують той самий елемент, тож зміна з’являється всюди.
Коли варто використовувати ⌘K / Ctrl+K замість бічної панелі?
Коли ви знаєте назву чи номер потрібного. ⌘K / Ctrl+K знаходить за назвою елементи, сторінки, документи, діаграми й команди; бічна панель — для перегляду за етапами життєвого циклу.
Чому немає кнопки «Зберегти»?
Holarch зберігає кожну зміну одразу й показує стан збереження на верхній панелі. Кожна зміна — один крок відмінення, тож ⌘Z / Ctrl+Z скасовує її.
Докладніше
Стенограма
Показати стенограму (озвучення і те, що на екрані)
Introduction
Welcome to Holarch Training. This first chapter is a tour of the workspace: where things are, how to move around, and how to read what each part of the window tells you. All you need is a browser.
By the end of it, you will know the parts of the window that every later chapter uses: the rail, the top bar, the editor tabs, the inspector, and the Help.
Manage Projects and the demo
After you sign in, Holarch opens Manage Projects. It lists the projects you own and the projects others have shared with you. A project holds one model of one system: its requirements, functions, parts, tests and documents.
On screen: Manage Projects.
To learn the workspace, start with the demo project. Click Project Files, then New Demo Project, and choose the CubeSat. Holarch builds a complete model of a small earth observation satellite, the CubeSat EO-1.
On screen: Project Files ▾ → New Demo Project ▸ CubeSat.
Home
The project opens on its Home page. Needs attention, at the top, counts the open problems: links to review, overdue to-be-determined items, failing tests, measures over their limits, high risks and model check findings.
On screen: Home: Needs attention.
Below it, the Lifecycle cards give the main number of each stage, such as how many requirements are approved and how many are verified. Next actions lists the most urgent work.
On screen: Home: Lifecycle, Next actions.
The rail and overview pages
On the left is the rail. Its groups follow the systems engineering lifecycle from top to bottom: needs and requirements, behavior, architecture, interfaces, verification, risk and decisions, and plan and deliver.
On screen: The rail's lifecycle groups.
Below the groups are the tools that work across the whole project: the Database, Diagrams, the Trash, Settings with the project's Schema, Help, and Manage Projects to switch projects.
On screen: The rail tools.
Click a group to open its overview page. Needs and Requirements shows live numbers for the stage, a card for each of its pages, and its recent diagrams. The group's pages also appear under it in the rail.
On screen: Needs & Requirements overview.
Documents and the inspector
Click Documents, and open the system requirements specification.
On screen: Documents → the SRS.
The document opens in an editor tab under the top bar. The outline on the left lists its sections, and the full text is in the middle, numbered and nested.
On screen: The document editor and its outline.
Click a requirement's number in the text. The inspector on the right shows the selected item in one panel: the item itself, its attributes, its trace to the rest of the model, its discussion and its details.
On screen: Select 3.1 Orbit Average Power; the inspector.
Click Trace at the top of the inspector. This requirement is satisfied by part of the power system and has a test case that verifies it. These links are what make the model more than a document.
On screen: Inspector → Trace.
The Database and the Item View
Now click Database at the bottom of the rail. It lists every item of the model in one table, whichever page it was created on.
On screen: Database.
Filters narrow the table. Click Filter, and choose the class Requirement. The table shows only requirements: the same ones you just saw in the document.
On screen: + Filter → Class → Requirement.
Select a row, and the same inspector opens. There is only one copy of each requirement, so an edit here also changes the document.
On screen: Select a row; the inspector.
Double-click a row to open the item in the Item View. It shows everything about one item on one page: its attributes, relationships, comments and history.
On screen: Double-click → Item View.
Each document, diagram or item you open gets an editor tab. Tabs stay open while you work, and after a reload. Click the document's tab to go back to it.
On screen: Editor tabs → back to the SRS.
Search, problems and Help
To jump to anything by name, press Command K, or click Search in the top bar. Type deploy.
On screen: Search → deploy.
Results include pages, items, documents and diagrams. Press Enter to open the function Deploy Solar Arrays in the Item View, in another tab.
On screen: Enter → Deploy Solar Arrays.
The warning icon in the top bar counts the open problems. Click it for the list. Each entry opens the page that holds the data, so you can fix it there.
On screen: Problems list.
Holarch saves every change as you make it, and the top bar shows the save status. There is no Save button. Every change is one undo step, with Command Z or the Undo button.
On screen: Save status, Undo and Redo.
Your account menu is at the top right. It holds your account settings, preferences, AI settings, Send Feedback, and Sign Out.
On screen: Account menu.
When you are not sure what a page does, click the question mark in the top bar. It opens the Help for the page you are on in a side panel, with steps and examples.
On screen: ? → Help side panel.
Help in the rail opens the Help Center, the keyboard shortcuts, a primer on the modeling language, and guided tutorials. The Help Center also holds the videos, including this course.
On screen: Help in the rail.
Recap
Let's recap. You opened the demo project, moved through the lifecycle with the rail, read items in the inspector, used the Database and the Item View, searched with Command K, and found Help for every page.
In the next chapter, you create your own project and its first items. See you there.