Kurs bölümleri
Eğitim · Kurs 6. Holarch'a geçiş · Bölüm 6.1 / 5
6.1 Bir geçişi planlama 3:00
İçe aktarmadan önce her veri türünün modelde nereye gideceğine karar verin.
Holarch 2.21 sürümünü gösterir.
Neler öğreneceksiniz
- Her kaynak veri türünü bir sınıfa, bir etikete, bir özniteliğe veya bir ilişkiye eşleyin
- Bir projenin şemasında bir içe aktarmanın gerektirdiği öznitelikleri ve etiketleri denetleyin
- Şemada karşılığı olmayan bir kaynak alanı için bir öznitelik ekleyin
- İçe ve dışa aktarma sayfasını bulun ve dört adımını sayın
Holarch'a geçişi planlayın: örnek Plant Inspection Drone ve ekibinin getirdiği dosyalar, verilerin LML sınıflarına, etiketlerine, özniteliklerine ve ilişkilerine nasıl eşlendiği, projenin şemasının nelerin mevcut olduğunu nerede gösterdiği ve her içe aktarmanın ne yaptığı.
Proje dosyaları
- Bitmiş proje (.holarch.json; Projeleri yönet → Proje dosyaları ▾ → Proje içe aktar (.json)…)
Video holarch.app'ten oynatılır; bkz. Gizlilik Politikası.
Alıştırma
Bunu Holarch'ta, CubeSat EO-1 demo projesinde kendiniz yapın.
- EO-1 demo projenizi açın (yoksa oluşturun: Projeleri yönet → Proje dosyaları ▾ → Yeni demo proje → CubeSat (Rehberli sistem mühendisliği)).
- Şeritte Ayarlar → Şema'yı açın, Sınıflar altında Gereksinim'a tıklayın ve bir gereksinim elektronik tablosunun doldurabileceği öznitelikleri listeleyin (örneğin Öncelik, Sahip, Doğrulama yöntemi).
- Şemanın Etiketler sayfasını açın ve Performance Requirement gibi türlerin nerede tutulduğunu bulun.
- Bir tedarikçinin izleme tablosunda karşılığı olmayan bir
Supplier Refsütunu olduğunu varsayın: Gereksinim üzerinde + Öznitelik'e tıklayın, adınıSupplier Refkoyun, bir metin türü seçin ve Öznitelik ekle'ye tıklayın. - İhtiyaçlar ve gereksinimler → İçe ve dışa aktarma'yı açın ve bırakma alanının hangi biçimleri kabul ettiğini ve Dışa aktar kartının neler sunduğunu okuyun.
Supplier Ref, Requirement'ın öznitelik listesinde en sonda olduğunda ve tipik bir izleme tablosunun her sütununun nereye gideceğini söyleyebildiğinizde işiniz bitmiştir.
Kendinizi sınayın
- İçe aktarmadan önce her veri türünün nereye gideceğine neden karar verilmeli?
- Bir sütunun eşleşen bir özniteliği yok. Seçenekleriniz nelerdir?
- Bir içe aktarma ters gitti. Onu nasıl geri alırsınız?
- İçe aktarma sayfası yerine ne zaman Projeleri yönet → Proje içe aktar (.json)… kullanırsınız?
Yanıtları göster
İçe aktarmadan önce her veri türünün nereye gideceğine neden karar verilmeli?
Doğru sınıflara, etiketlere, özniteliklere ve ilişkilere yerleşen veriler izlemede, kalite denetimlerinde ve raporlarda hemen çalışır. Bunu içe aktarmadan sonra düzeltmek, birçok öğeyi elle düzenlemek demektir.
Bir sütunun eşleşen bir özniteliği yok. Seçenekleriniz nelerdir?
Özniteliği içe aktarmadan önce Ayarlar → Şema'da ekleyin veya Eşle adımında sütunu Yeni öznitelik (şemaya eklendi) seçeneğine eşleyin.
Bir içe aktarma ters gitti. Onu nasıl geri alırsınız?
⌘Z / Ctrl+Z'ye bir kez basın: İçe aktarma sayfasından yapılan bir içe aktarma tek bir geri alma adımıdır.
İçe aktarma sayfası yerine ne zaman Projeleri yönet → Proje içe aktar (.json)… kullanırsınız?
Bir projenin tamamını yeni ve ayrı bir proje olarak geri yüklemek için. İçe aktarma sayfası ise bir dosyanın öğelerini açık olan projeyle birleştirir.
Daha fazla bilgi
Döküm
Dökümü göster (anlatım ve ekranda görünenler)
Introduction
Welcome to Migrating to Holarch. Most teams arrive with their data in other places: requirements in spreadsheets and Word documents, specifications from suppliers, and models in other tools. This track shows how each one comes in, and what to check afterwards.
This first chapter is about planning. A little thought about where each kind of data belongs saves a lot of clean-up later.
The example
Our example is the Plant Inspection Drone, a drone system that inspects tanks and pipe racks inside a process plant. Its team brings four files.
On screen: The example card.
Map your data
Before importing, decide where each kind of data goes. Rows of a requirements list become Requirements. Section headings become Statements that hold them. Parts and systems become Assets, and functions become Actions.
On screen: Mapping card: classes.
Types such as functional or performance become labels. Fields such as status or rationale become attributes. And links such as satisfies, verified by or refines become relationships, so they can be traced later.
On screen: Mapping card: labels, attributes, relationships.
Check the schema
Create the project first. In Manage Projects, click New Project, name it Plant Inspection Drone, and click Create Project.
On screen: + New Project → Plant Inspection Drone → Create Project.
The project's schema lists every class with its attributes and labels. Open Settings at the bottom of the rail, then Schema.
On screen: Settings → Schema.
Select Requirement. Its attributes include the status, with the values Draft, In Review, Approved and Rejected. The usual kinds of requirement, such as Functional and Performance, are under Labels. If your data has a field with no home here, an owner can add an attribute or a label before the import.
On screen: Schema → Requirement → its attributes; then Labels.
One import page
All imports start on one page: Needs and Requirements, then Import and Export. Drop any file here: Word, Holarch project files, Excel and CSV, plain text, UML and SysML models, or ReqIF. Holarch detects the format from the file.
On screen: Needs & Requirements → Import and Export: the drop zone.
Each import takes four steps: File, Map, Review and Import. It gives the items new identities in your project, and the whole import is a single undo step, so you can try it and take it back. Content from files is cleaned of anything unsafe on the way in.
On screen: The Import steps.
Recap
Let's recap. You met the Plant Inspection Drone and its files, mapped their data to classes, labels, attributes and relationships, checked the schema, and found the Import and Export page.
Next, the requirements tracker comes in from Excel.