Capitoli del corso
Formazione · Percorso 3. Comportamento e architettura · Capitolo 3.1 di 6
3.1 Funzioni e FFBD 3:52
Dare alle funzioni una funzione di primo livello, poi scriverne il flusso come testo e ottenere l’FFBD.
Mostra Holarch 1.27.
Che cosa si impara
- Scegliere una funzione di primo livello nella pagina Analisi funzionale
- Scomporre una funzione in sottofunzioni con la relazione decomposed by
- Scrivere un flusso funzionale come testo con frecce, AND e LOOP
- Leggere l’FFBD che Holarch disegna dal flusso e aprire l’FFBD di una sottofunzione
Organizzare le funzioni della Bike-Share Dock sotto una funzione di primo livello nella pagina Analisi funzionale, aggiungere una funzione, scrivere il flusso funzionale come una riga di testo con frecce, AND e LOOP, e lasciare che Holarch ne disegni il diagramma a blocchi del flusso funzionale (FFBD).
File di progetto
- Progetto iniziale (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
- Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)
Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.
Esercitazione
Provare in prima persona in Holarch, sul progetto demo CubeSat EO-1.
- Aprire il proprio progetto demo EO-1, oppure crearlo: Gestisci progetti → File di progetto ▾ → Nuovo progetto demo → CubeSat (ingegneria dei sistemi guidata).
- Nel Database, selezionare F9 Transmit Payload Data. Nella sua sezione Traccia, fare clic su + accanto a decomposed by (spuntare Mostra tutte le relazioni se non è elencata), scegliere Nuova Action… e creare
Enable Transmitter,Send Data File,Confirm Receipt,Disable TransmittereReport Pass Summary. - Aprire Comportamento → Analisi funzionale, fare clic su Scegli… accanto a Funzione di primo livello e scegliere F9 Transmit Payload Data. La scheda Funzioni elenca le sue cinque sottofunzioni.
- In Flusso e FFBD, fare clic su Modifica come testo…, digitare
"Enable Transmitter" -> LOOP[return="next file"]("Send Data File" -> "Confirm Receipt") -> AND("Disable Transmitter" | "Report Pass Summary")e fare clic su Applica. - Fare clic su Apri FFBD e trovare il ciclo con la sua freccia di ritorno e la porta AND. Poi scegliere di nuovo F0 Perform EO-1 Mission come funzione di primo livello, aprirne l’FFBD e fare doppio clic su F9 per aprire l’FFBD di F9.
- Per una procedura guidata con verifica, eseguire il tutorial 4 Analisi funzionale (Guida → Tutorial).
L’esercizio è completato quando l’FFBD di F9 mostra Enable Transmitter, un ciclo di Send Data File e Confirm Receipt con la freccia di ritorno etichettata next file, e un AND con due rami.
Verifica
- Perché la pagina Analisi funzionale ha bisogno di una funzione di primo livello?
- Qual è la differenza tra AND e OR in un flusso?
- Che cosa succede a una funzione lasciata fuori dal flusso testuale?
- Si modifica il flusso nella scheda Flusso e FFBD. Che cosa succede all’FFBD?
Mostra le risposte
Perché la pagina Analisi funzionale ha bisogno di una funzione di primo livello?
La pagina lavora a partire da un’Action: i suoi figli decomposed by sono le funzioni che elenca, collega in flusso e disegna. Scegliendo un’altra funzione di primo livello, come F9, si vede la scomposizione di quella funzione.
Qual è la differenza tra AND e OR in un flusso?
AND esegue tutti i suoi rami in parallelo, e il flusso prosegue quando ogni ramo è terminato. OR prende esattamente uno dei suoi rami.
Che cosa succede a una funzione lasciata fuori dal flusso testuale?
Holarch la elenca come mancante dal testo e la aggiunge dopo l’ultimo elemento del flusso, così nessuna funzione va persa.
Si modifica il flusso nella scheda Flusso e FFBD. Che cosa succede all’FFBD?
Viene ridisegnato. L’FFBD, l’albero delle funzioni e la tabella delle funzioni leggono tutti lo stesso modello, quindi non c’è nulla da aggiornare a mano.
Per saperne di più
Trascrizione
Mostra la trascrizione (narrazione e contenuto dello schermo)
Introduction
Welcome to Behavior and Architecture. This track models what the Bike-Share Dock does, what it is made of, how its parts connect, and whether the design adds up.
This first chapter is about functions, and the order they run in.
Functions and their flow
A function is something the system must do, named with a verb: rent a bike, take a payment. A functional flow block diagram, the F F B D, shows the order the functions run in, which ones run at the same time, and which ones repeat.
On screen: Card: functions and the FFBD.
A top-level function
Open Behavior, then Functional Analysis. The page works from one top-level function, and the dock has none yet. The four functions from Getting Started stand on their own.
On screen: Behavior → Functional Analysis: no top-level function.
Click Choose, then Create New. The top-level function is the whole job of the system: Operate the Bike-Share Dock, numbered F zero.
On screen: Choose… → Create New… → F.0 Operate the Bike-Share Dock.
Now put the four functions under it. Open the Database, select Operate the Bike-Share Dock, and in its Trace section, link Rent a Bike, Return a Bike, Charge Bikes and Take Payment under decomposed by.
On screen: Database → F.0 → decomposed by → F.1–F.4.
One function is missing: the dock reports its status, the free bays and the charge levels, to the back office. Create a new Action, F five, Report Dock Status.
On screen: New Entity: Action F.5 Report Dock Status.
Place it in the hierarchy from the other side: show all relations in its Trace section, and under decomposes, link it to Operate the Bike-Share Dock.
On screen: F.5 → decomposes → F.0.
Back in Functional Analysis, the Functions tab lists all five under the top-level function.
On screen: Functional Analysis → Functions.
The flow as text
Open Flow and FFBD. Until someone writes the flow, it simply lists the functions in number order, which says nothing about how they work together.
On screen: Flow & FFBD tab.
Choose Edit as Text. A flow is written like a sentence: function numbers joined by arrows, in the order they run. A rider pays, takes the bike, and later returns it: F four, arrow, F one, arrow, F two.
On screen: Edit as Text → F.4 -> F.1 -> F.2.
After a return, two things happen at the same time: the bike charges, and the dock reports its status. AND opens parallel branches, separated by a bar. Both start together, and the flow goes on when both are done.
On screen: -> AND(F.3 | F.5).
The whole cycle repeats for the next rider. LOOP repeats what is inside its brackets, and return names the arrow that goes back. Wrap the flow in a loop.
On screen: LOOP[return="next rider"]( … ).
The FFBD
The preview below draws the diagram as you type. Apply it.
On screen: Preview → Apply.
Holarch draws the F F B D from that one line: a numbered box for each function, a circle where the AND branches open and close, and the loop with the return arrow labeled next rider.
On screen: The FFBD.
The diagram, the hierarchy and the functions table all read the same model. Change the flow, and the diagram follows.
On screen: The FFBD.
Recap
Let's recap. You created a top-level function, placed the dock's functions under it, wrote their flow as text with arrows, AND and LOOP, and got the F F B D drawn from it.
Next, you take one function apart, step by step, on an action diagram.