Holarch
Capitoli del corso

Formazione · Percorso 9. Fondamenti di SysML v2 · Capitolo 9.1 di 8

9.1 Definitions and Attributes 4:33

Scrivere tipi di valore e componenti nel testo SysML v2, con valori espressi in unità.

Mostra Holarch 2.22.

Tutti i capitoli · 9.2 Ports and Interfaces →

Che cosa si impara

  • Scrivere un’enumerazione, un tipo di valore e una definizione di part astratta nell’Editor
  • Specializzare una definizione con `:>` e assegnare agli attributi ereditati valori con unità tramite `redefines`
  • Trovare e correggere un errore di unità che il controllo sottolinea
  • Scrivere una definizione con Inserisci ▾ e il completamento e cercare un tipo nella Libreria standard
  • Rinominare un elemento ovunque con F2 in un solo passo di annullamento

Scrivere definizioni e attributi SysML v2 nell’Editor di Holarch, seguendo il tutorial SysML v2 Definitions and Attributes su un piccolo progetto Hybrid Car: un’enumerazione, un tipo di valore che specializza ScalarValue, un componente astratto e le sue specializzazioni con valori in unità, un errore di unità trovato dal controllo, il completamento e la Libreria standard, Inserisci e la ridenominazione con F2. SysML è un marchio registrato di Object Management Group, Inc.

File di progetto

  • Progetto completato (.holarch.json; Gestisci progetti → File di progetto ▾ → Importa progetto (.json)…)

Il video viene riprodotto da holarch.app; vedere l’Informativa sulla privacy.

Esercitazione

Provare in prima persona in Holarch, sul progetto demo Hybrid Car (SysML v2).

  1. Creare la demo Hybrid Car: Gestisci progetti → File di progetto ▾ → Nuovo progetto demo → Hybrid Car (SysML v2). Aprire Modello → Editor e il package Vehicles.
  2. Sotto enum def FuelKind, aggiungere enum def CoolingMode { enum passive; enum active; }.
  3. Sotto part def Body, scegliere Inserisci ▾ → Definizione di part e completare part def Radiator :> Component con attribute redefines mass = 8 [kg];, attribute coolantVolume : VolumeValue; (digitare Volu e accettare VolumeValue dall’elenco di completamento con Invio) e attribute mode : CoolingMode;.
  4. Cambiare la massa in 8 [W], puntare sulla sottolineatura per leggere il messaggio, poi riportarla a 8 [kg].
  5. In part def Powertrain, aggiungere part radiator : Radiator;. Poi posizionare il cursore su coolantVolume, premere F2 e rinominarlo in coolantCapacity.
  6. Per un percorso guidato con verifica, eseguire il tutorial SysML v2 Definitions and Attributes (Guida → Tutorial).

L’esercizio è completato quando lo stato sotto l’editor non segnala problemi e il Browser mostra Radiator sotto Vehicles con coolantCapacity e mode.

Verifica

  1. In part def Battery :> Component { attribute redefines mass = 45 [kg]; }, che cosa fanno rispettivamente :> e redefines?
  2. Perché Component è dichiarato abstract part def?
  3. Perché attribute redefines power = 60 [kg]; dà un errore?
  4. Qual è la differenza tra doc /* … */ e una riga //?
Mostra le risposte
  1. In part def Battery :> Component { attribute redefines mass = 45 [kg]; }, che cosa fanno rispettivamente :> e redefines?

    :> rende Battery una specializzazione di Component, quindi eredita mass, partNumber e power. redefines sostituisce in Battery la mass ereditata con una feature propria, qui legata a 45 kg.

  2. Perché Component è dichiarato abstract part def?

    Nulla è un componente in quanto tale, esistono solo tipi di componenti. Una definizione astratta raccoglie ciò che tutti i componenti hanno in comune, e solo le sue specializzazioni, come Battery o Engine, descrivono parti reali.

  3. Perché attribute redefines power = 60 [kg]; dà un errore?

    power è di tipo PowerValue, e i chilogrammi sono un’unità di massa. Il controllo valuta le unità, quindi sottolinea il valore finché l’unità non è un’unità di potenza come [W].

  4. Qual è la differenza tra doc /* … */ e una riga //?

    Un commento doc è documentazione che appartiene all’elemento e fa parte del modello. Una nota // resta solo nel testo e non fa parte del modello.

Per saperne di più

Trascrizione

Mostra la trascrizione (narrazione e contenuto dello schermo)

Introduction

Welcome to SysML v2 Fundamentals. This track teaches the SysML v2 textual notation and views in Holarch, one task per chapter, on the starter projects of Holarch's SysML v2 tutorials, so you can follow along step by step.

In this chapter you write definitions and attributes: an enumeration, a value type, an abstract component and the components that specialize it, with values in units.

Start the tutorial

In Manage Projects, open Project Files and choose Start a Tutorial. Under the tutorials for SysML v2 projects, click Start on Definitions and Attributes. Holarch creates a small Hybrid Car project and opens the step panel, which checks each step as you go.

On screen: Project Files ▾ → Start a Tutorial… → SysML v2: Definitions and Attributes → Start; the step panel opens.

Enumerations and value types

Open Model, then Editor. The package Vehicles holds one part definition, Car, with two attributes. Every declaration is a keyword and a name, then a body in braces, or a semicolon when there is no body.

On screen: Model → Editor: Vehicles; outline part def Car.

An enumeration is a value type with a fixed set of values. Above the car, write the drive mode: economy, normal or sport.

On screen: Caret after the imports; type enum def DriveMode.

Next, a value type of your own. Tire pressure specializes Scalar Value from the standard library. The short symbol after the name means specializes.

On screen: Below DriveMode; type attribute def TirePressure :> ScalarValue;

Specialization and units

Now an abstract component. There is no component as such, only kinds of components, and every one has a mass, a part number and a power. The doc comment is part of the model. Two slashes start a note that stays in the text only.

On screen: Below TirePressure; type abstract part def Component.

The battery is a component, so it has a mass, a part number and a power of its own. Write it with a mistake on purpose: a power in kilograms.

On screen: Below Component; type part def Battery :> Component with power = 60 [kg].

The checker underlines the value, and the status under the editor counts the error. Point at the underline to read the message.

On screen: Problems count; the information card on 60 [kg].

Change kilograms to watts, and the error clears. Redefines gives each inherited attribute the battery's own value, with its unit in square brackets.

On screen: kg → W; No problems, Applied.

Completion and the Standard Library

Completion knows the model and the library. Inside the battery, type attribute capacity, a colon, and the start of Energy Value. Press Enter to take it from the list, and end the line with a semicolon.

On screen: Inside Battery: attribute capacity : Ener → completion → Enter → ;

Point at Energy Value. The card shows that it comes from the I S Q package of the standard library.

On screen: The information card on EnergyValue.

The Standard Library page lists every package and definition of that library. Open Settings, then Standard Library, and search for Energy Value.

On screen: Settings → Standard Library; Find EnergyValue.

Insert

Back in the Editor, Insert writes a construct for you. Place the cursor below the battery, open Insert, and choose Part Definition. Type Engine, and press Tab to move into its body.

On screen: Model → Editor; caret below Battery; Insert ▾ (open on camera) → Part Definition; Engine; Tab.

The engine is a component too. Give it its mass and a number of cylinders, and make it specialize Component.

On screen: Body: mass 110 kg, cylinders : Integer; then :> Component after the name.

Usages and rename

Now use the definitions. Inside the car, add a drive mode, a battery and an engine. Each usage is typed by a definition after the colon, the drive mode by the enumeration you wrote first.

On screen: In Car after curbMass: attribute mode : DriveMode; part battery : Battery; part engine : Engine;

To rename a name everywhere it is used, place the cursor on cylinders and press F2. Enter cylinder count and confirm. Every reference to it changes, in one undo step.

On screen: Caret in cylinders; F2; New name cylinderCount; OK.

Every step is ticked off. Click Mark as Done to finish the tutorial.

On screen: Step panel → Mark as Done.

Recap

Let's recap. You started a SysML v2 tutorial, wrote an enumeration and a value type, an abstract component with specializations and values in units, let the checker find a wrong unit, and used completion, the Standard Library, Insert and rename.

Next, ports and interfaces connect these components.