Holarch
Capítulos do curso

Treinamento · Trilha 14. Planilhas · Capítulo 14.3 de 5

14.3 Tabelas, busca e visões 2:17

Formate um intervalo como tabela, localize e substitua texto e salve visões com nome sem alterar as células.

Mostra o Holarch 2.35.

← 14.2 Formatos e layout · Todos os capítulos · 14.4 Gráficos e dados do modelo →

O que você vai aprender

  • Formatar um intervalo como tabela com nome e usá-la em fórmulas
  • Localizar e substituir texto em toda a pasta de trabalho em um único passo
  • Ativar os botões de filtro e classificar uma coluna
  • Salvar uma visão com nome e alternar entre visões

Organize o orçamento de massa do EO-1: formate as linhas dos subsistemas como uma tabela com nome, linhas em faixas e botões de filtro, renomeie um subsistema em todos os lugares com Localizar e substituir, depois classifique a tabela por massa em uma visão com nome compartilhada com o projeto e volte para a visão Padrão, que continua mostrando as células como foram armazenadas.

Arquivos de projeto

  • Projeto inicial (.holarch.json; Gerenciar projetos → Arquivos de projeto ▾ → Importar projeto (.json)…)
  • Projeto concluído (.holarch.json; Gerenciar projetos → Arquivos de projeto ▾ → Importar projeto (.json)…)

O vídeo é reproduzido a partir de holarch.app; veja a Política de Privacidade.

Prática

Faça isto você mesmo no Holarch, no CubeSat EO-1.

  1. Abra o arquivo inicial do capítulo ou sua pasta de trabalho do capítulo 14.2.
  2. Selecione A2:E8, clique em Tabela, dê o nome Subsystems e clique em OK.
  3. Abra Localizar e substituir, localize Comms, abra o campo de substituição, digite Communications, clique em Localizar tudo e depois em Substituir tudo.
  4. Clique na tabela, abra Classificar e filtrar e ative Botões de filtro. Em With contingency, escolha Classificar de Z a A.
  5. Clique em Salvar visão, dê o nome Heaviest first, escolha Todos com acesso e salve. Alterne entre Padrão e Heaviest first.

Você terminou quando a tabela se chamar Subsystems, Comms aparecer como Communications e a visão Heaviest first ordenar as linhas, enquanto Padrão as mostra na ordem original.

Teste-se

  1. Como uma fórmula se refere à coluna Mass da tabela Subsystems?
  2. Classificar em uma visão altera as células?
  3. O que uma visão guarda além da classificação e dos filtros?
Mostrar as respostas
  1. Como uma fórmula se refere à coluna Mass da tabela Subsystems?

    Como Subsystems[Mass]: o nome da tabela com o nome da coluna entre colchetes.

  2. Classificar em uma visão altera as células?

    Não. Uma visão muda apenas como você vê a planilha; voltar para Padrão mostra as linhas na ordem original.

  3. O que uma visão guarda além da classificação e dos filtros?

    Colunas ocultas, larguras de coluna e painéis congelados.

Saiba mais

Transcrição

Mostrar a transcrição (narração e o que aparece na tela)

Introduction

Chapter three: tables, find and views. A table gives a block of rows a name and a style. Find and Replace changes text in one step. And views show the same cells in different ways.

In this chapter you organize the budget.

Tables

Select the headings and the six subsystems, A2 to E8, and click Table.

On screen: Name Box A2:E8 → Table.

The dialog shows the range, and that the first row holds the headers. Name the table Subsystems, and click OK.

On screen: Range A2:E8, headers; name Subsystems → OK.

The table has a styled header row and banded rows, and grows when you add a row below it. Its name works in formulas: Subsystems, with a column name in square brackets.

On screen: The table: header style, banded rows.

Find and Replace

One subsystem is abbreviated. Open Find and Replace. Find Comms, open the replace field, and type Communications.

On screen: Find ▾ → Comms; ⇄ → Communications.

Find All lists each match with its sheet and cell. Click Replace All: the name is changed everywhere it appears, in one undo step. Close the bar.

On screen: Find All → the results; Replace All → close.

Named views

Now a view. Views change how you see the sheet, never the cells. Click in the table, open Sort and Filter, and turn on Filter Buttons.

On screen: B3 → Sort & Filter ▾ → Filter Buttons.

Click the filter button on With contingency, and choose Sort Z to A: the heaviest subsystem comes first.

On screen: With contingency ▾ → Sort Z to A.

The views bar shows the unsaved change. Click Save View, name it Heaviest first, choose Everyone with access, and save it.

On screen: Save View → Heaviest first, Everyone with access → Save View.

A view keeps sort, filters, hidden columns, widths and frozen panes. Click Default: the rows are back in their order, because the cells never changed. Everyone with access can switch views without affecting anyone else.

On screen: Default → rows in order; Heaviest first.

Recap

To recap: format rows as a named table, use Find and Replace for changes in many cells, and save sorts and filters as views.

In the next chapter, you chart the budget and feed it from the model.