Holarch
Rozdziały kursu

Szkolenia · Ścieżka 6. Migracja do Holarch · Rozdział 6.1 z 5

6.1 Planowanie migracji 3:00

Zdecyduj przed importem, gdzie w modelu trafi każdy rodzaj danych.

Pokazuje Holarch 2.21.

Wszystkie rozdziały · 6.2 Wymagania z Excel i CSV →

Czego się nauczysz

  • Przypisywanie każdego rodzaju danych źródłowych do klasy, etykiety, atrybutu lub relacji
  • Sprawdzanie w schemacie projektu atrybutów i etykiet potrzebnych do importu
  • Dodawanie atrybutu dla pola źródłowego, które nie ma miejsca w schemacie
  • Odnajdywanie strony Import i eksport i nazywanie jej czterech kroków

Zaplanuj przejście do Holarch: przykładowy Plant Inspection Drone i pliki, które przynosi jego zespół, jak dane przekładają się na klasy, etykiety, atrybuty i relacje LML, gdzie schemat projektu pokazuje, co jest dostępne, i co robi każdy import.

Pliki projektu

  • Projekt ukończony (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)

Film jest odtwarzany z holarch.app; zobacz Politykę prywatności.

Ćwiczenie

Wykonaj to samodzielnie w Holarch, w projekcie demonstracyjnym CubeSat EO-1.

  1. Otwórz swój projekt demonstracyjny EO-1 (jeśli go nie masz, utwórz go: Zarządzaj projektami → Pliki projektu ▾ → Nowy projekt demonstracyjny → CubeSat (inżynieria systemów z przewodnikiem)).
  2. Otwórz Ustawienia → Schemat na pasku nawigacji, kliknij Wymaganie w sekcji Klasy i wypisz atrybuty, które mógłby wypełnić arkusz wymagań (np. Priority, Owner, Verification Method).
  3. Otwórz stronę Etykiety schematu i znajdź, gdzie przechowywane są rodzaje takie jak Performance Requirement.
  4. Załóżmy, że arkusz dostawcy ma kolumnę Supplier Ref, która nie ma swojego miejsca: w klasie Wymaganie kliknij + Atrybut, nazwij go Supplier Ref, wybierz typ tekstowy i kliknij Dodaj atrybut.
  5. Otwórz Potrzeby i wymagania → Import i eksport i sprawdź, jakie formaty przyjmuje strefa upuszczania i co oferuje karta Eksportuj.

Gotowe, gdy Supplier Ref jest ostatni na liście atrybutów klasy Requirement i umiesz powiedzieć, gdzie trafiłaby każda kolumna typowego arkusza.

Sprawdź się

  1. Dlaczego przed importem trzeba zdecydować, gdzie trafi każdy rodzaj danych?
  2. Kolumna nie ma pasującego atrybutu. Jakie są możliwości?
  3. Import się nie udał. Jak go wycofać?
  4. Kiedy używać Zarządzaj projektami → Importuj projekt (.json)… zamiast strony Import?
Pokaż odpowiedzi
  1. Dlaczego przed importem trzeba zdecydować, gdzie trafi każdy rodzaj danych?

    Dane, które trafiają do właściwych klas, etykiet, atrybutów i relacji, od razu działają w śledzeniu powiązań, kontrolach jakości i raportach. Poprawianie ich po imporcie oznacza ręczną edycję wielu elementów.

  2. Kolumna nie ma pasującego atrybutu. Jakie są możliwości?

    Dodaj atrybut w Ustawienia → Schemat przed importem lub w kroku Mapowanie przypisz kolumnę do opcji Nowy atrybut (dodany do schematu).

  3. Import się nie udał. Jak go wycofać?

    Naciśnij raz ⌘Z / Ctrl+Z: import ze strony Import to jeden krok cofania.

  4. Kiedy używać Zarządzaj projektami → Importuj projekt (.json)… zamiast strony Import?

    Aby przywrócić cały projekt jako nowy, osobny projekt. Strona Import scala elementy pliku z otwartym projektem.

Więcej informacji

Transkrypcja

Pokaż transkrypcję (narracja i to, co widać na ekranie)

Introduction

Welcome to Migrating to Holarch. Most teams arrive with their data in other places: requirements in spreadsheets and Word documents, specifications from suppliers, and models in other tools. This track shows how each one comes in, and what to check afterwards.

This first chapter is about planning. A little thought about where each kind of data belongs saves a lot of clean-up later.

The example

Our example is the Plant Inspection Drone, a drone system that inspects tanks and pipe racks inside a process plant. Its team brings four files.

On screen: The example card.

Map your data

Before importing, decide where each kind of data goes. Rows of a requirements list become Requirements. Section headings become Statements that hold them. Parts and systems become Assets, and functions become Actions.

On screen: Mapping card: classes.

Types such as functional or performance become labels. Fields such as status or rationale become attributes. And links such as satisfies, verified by or refines become relationships, so they can be traced later.

On screen: Mapping card: labels, attributes, relationships.

Check the schema

Create the project first. In Manage Projects, click New Project, name it Plant Inspection Drone, and click Create Project.

On screen: + New Project → Plant Inspection Drone → Create Project.

The project's schema lists every class with its attributes and labels. Open Settings at the bottom of the rail, then Schema.

On screen: Settings → Schema.

Select Requirement. Its attributes include the status, with the values Draft, In Review, Approved and Rejected. The usual kinds of requirement, such as Functional and Performance, are under Labels. If your data has a field with no home here, an owner can add an attribute or a label before the import.

On screen: Schema → Requirement → its attributes; then Labels.

One import page

All imports start on one page: Needs and Requirements, then Import and Export. Drop any file here: Word, Holarch project files, Excel and CSV, plain text, UML and SysML models, or ReqIF. Holarch detects the format from the file.

On screen: Needs & Requirements → Import and Export: the drop zone.

Each import takes four steps: File, Map, Review and Import. It gives the items new identities in your project, and the whole import is a single undo step, so you can try it and take it back. Content from files is cleaned of anything unsafe on the way in.

On screen: The Import steps.

Recap

Let's recap. You met the Plant Inspection Drone and its files, mapped their data to classes, labels, attributes and relationships, checked the schema, and found the Import and Export page.

Next, the requirements tracker comes in from Excel.