課程章節
培訓 · 第 7 單元:遵循流程 · 第 7.3 章,共 4 章
7.3 階段與關卡 1:52
以關卡審查結束一個階段,並進入下一個階段。
展示 Holarch 1.6。
您將學到
- 為階段新增關卡里程碑並設定其日期
- 以該階段的文件建立審查套件
- 檢視後續階段的檢查,而不變更目前階段
- 在關卡審查後將下一個階段設為目前階段
結束 Kossiakoff 指南的需要分析階段:新增關卡里程碑,建立收集該階段文件的審查套件並開啟它,預先查看下一個階段而不移動專案,然後將概念探索設為目前階段。
練習
在 Holarch 中於 CubeSat EO-1 示範專案上親自操作。
- 開啟您的 EO-1 示範專案(如果沒有,請建立它:管理專案 → 專案檔案 ▾ → 新增示範專案 → CubeSat(引導式系統工程))。以 Kossiakoff SE 方法開啟計畫 → SE 流程,位於需要分析階段。
- 在底部的階段關卡下,按一下新增關卡里程碑。開啟該里程碑,並將其日期設為今天起兩週後。
- 按一下建立審查套件,開啟該套件,並將 EO-1 System Requirements Specification 加入其中。
- 按一下生命週期中的概念探索,閱讀其檢查:需求、已追溯的需要、已檢查的品質與權衡研究。
- 按一下設為目前階段。
當概念探索標示為「目前」,且需要分析的關卡已關聯到其里程碑與審查套件時,即完成。
自我檢查
- 您在建立審查套件之後撰寫了一份新文件。它在套件中嗎?
- 按一下某個階段與「設為目前階段」有什麼不同?
- 關卡里程碑會顯示在哪裡?
顯示答案
您在建立審查套件之後撰寫了一份新文件。它在套件中嗎?
不在。套件包含建立時已存在的文件。之後的文件請自行加入套件。
按一下某個階段與「設為目前階段」有什麼不同?
按一下階段只會顯示其檢查。「設為目前階段」會為所有參與專案的人變更專案所在的位置。
關卡里程碑會顯示在哪裡?
它是標記為 Milestone 的 Time 項目。一旦有了日期,就會顯示在專案管理行事曆上,以及「即將發生的事件」下。
延伸閱讀
文字稿
顯示文字稿 (旁白與畫面內容)
Introduction
Chapter three: phases and gates. Each phase ends with a gate, a review that decides whether the project is ready to move on.
We finish the needs analysis phase of the Bike-Share Dock with a gate, and move on to concept exploration.
The phase gate
Open SE Process, and scroll to the bottom of the page. The phase gate is a reminder to hold a review at the end of needs analysis before moving on.
On screen: SE Process → Phase gate.
Click Add Gate Milestone. Holarch adds a milestone for the review to the model, and links it here.
On screen: Add Gate Milestone.
Then click Create Review Package. A review package is a compilation of the documents this phase produces. It picks up the concept of operations from the last chapter.
On screen: Create Review Package.
The review package
Click the package to open it. Everything the reviewers need is in one place, in the order you choose.
On screen: Open the review package.
The next phase
Go back to SE Process. To see what the next phase asks for, click concept exploration in the life cycle. You are only looking at it: the needs analysis phase is still current.
On screen: SE Process → click Concept exploration.
Concept exploration turns the needs into system requirements and compares candidate concepts. Its checks show what the model already has, such as the requirements written in Track 1, and what is still to do.
On screen: Concept exploration checks.
When the gate review has passed, click Make Current Phase. Concept exploration becomes the current phase of the project, for everyone working on it.
On screen: Make Current Phase.
Recap
Let's recap. You found the phase gate, added a gate milestone, created a review package with the phase's documents, looked ahead at the next phase, and made it current.
Next, you prepare a technical review from the model.