Holarch
Rozdziały kursu

Szkolenia · Ścieżka 9. Podstawy SysML v2 · Rozdział 9.4 z 8

9.4 Stany i przejścia 3:51

Pisanie maszyny stanów z wyzwalaczami, warunkami dozoru i akcjami stanów oraz rysowanie przejścia czasowego.

Pokazuje Holarch 2.22.

← 9.3 Akcje i przepływy · Wszystkie rozdziały · 9.5 Wymagania →

Czego się nauczysz

  • Definiowanie sygnałów i definicji stanu ze stanem początkowym
  • Pisanie przejść z wyzwalaczem, warunkiem dozoru i celem, w formie skróconej i jako nazwanych przejść
  • Nadawanie stanowi akcji entry, do i exit
  • Rysowanie przejścia w Widoku przejść stanów i ustawianie jego nazwy i wyzwalacza
  • Wykazywanie definicji stanu przez część

Zapisz maszynę stanów SysML v2 w Holarch zgodnie z samouczkiem SysML v2 Stany i przejścia na małym projekcie Hybrid Car: sygnały jako definicje, definicja stanu ze stanem początkowym, przejścia z wyzwalaczami i warunkami dozoru, akcje entry, do i exit, nazwane przejścia, Widok przejść stanów z narysowanym na nim przejściem czasowym oraz samochód, który wykazuje te stany. SysML jest zastrzeżonym znakiem towarowym Object Management Group, Inc.

Pliki projektu

  • Projekt ukończony (.holarch.json; Zarządzaj projektami → Pliki projektu ▾ → Importuj projekt (.json)…)

Film jest odtwarzany z holarch.app; zobacz Politykę prywatności.

Ćwiczenie

Wykonaj to samodzielnie w Holarch na projekcie demonstracyjnym Hybrid Car (SysML v2).

  1. Otwórz swój projekt demonstracyjny Hybrid Car (w razie potrzeby utwórz go: Zarządzaj projektami → Pliki projektu ▾ → Nowy projekt demonstracyjny → Hybrid Car (SysML v2)), otwórz Model → Edytor i pakiet VehicleBehavior.
  2. Po attribute def Unplug; dodaj attribute def FaultDetected;.
  3. Przed nawiasem zamykającym state def PowertrainStates dodaj state limpHome { entry action warnDriver; do action driveLimited; } i transition limpStop first limpHome accept StopRequest then off;.
  4. Otwórz Zachowanie → Maszyny stanów, kliknij + Nowy diagram, wybierz PowertrainStates w polu Pokazuje i kliknij Utwórz.
  5. Zaznacz electric i przeciągnij od jego uchwytu do limpHome; upuść na Przejście. W panelu przejścia wpisz Nazwa electricFault i Wyzwalacz FaultDetected, a następnie kliknij Pokaż w tekście.

Gotowe, gdy PowertrainStates zawiera limpHome, limpStop i przejście electricFault, które przyjmuje FaultDetected, a stan pod edytorem nie zgłasza problemów.

Sprawdź się

  1. Co czyni off stanem początkowym PowertrainStates?
  2. Po state off; następuje accept StartRequest if charge > 20 then electric;. Wskaż jego wyzwalacz, warunek dozoru, źródło i cel.
  3. Kiedy wykonywane są akcje entry, do i exit stanu?
  4. Co mówi exhibit state powertrainStates : PowertrainStates; w DrivenCar?
Pokaż odpowiedzi
  1. Co czyni off stanem początkowym PowertrainStates?

    entry; then off;: po entry następuje następstwo do off, więc maszyna stanów zaczyna tam. Widok rysuje to jako kropkę.

  2. Po state off; następuje accept StartRequest if charge > 20 then electric;. Wskaż jego wyzwalacz, warunek dozoru, źródło i cel.

    Wyzwalacz: sygnał StartRequest. Warunek dozoru: charge > 20. Cel: electric. Forma skrócona zaczyna się w stanie, po którym następuje, czyli off.

  3. Kiedy wykonywane są akcje entry, do i exit stanu?

    Akcja entry jest wykonywana przy wejściu do stanu, akcja do, gdy stan jest aktywny, a akcja exit przy opuszczaniu stanu.

  4. Co mówi exhibit state powertrainStates : PowertrainStates; w DrivenCar?

    Że samochód wykazuje tę maszynę stanów: samochód posiada użycie PowertrainStates, więc jego stany są stanami samochodu.

Więcej informacji

Transkrypcja

Pokaż transkrypcję (narracja i to, co widać na ekranie)

Introduction

Chapter four: states and transitions. A state machine says how a system reacts to events, and what it does in each state.

In this chapter you write signals and a state machine with triggers, guards and state actions, draw a timed transition in a view, and let the car exhibit the states.

Start the tutorial

Start the tutorial States and Transitions from Project Files, Start a Tutorial. Its starter project holds the powertrain package with the car, and nothing else yet.

On screen: Project Files ▾ → Start a Tutorial… → SysML v2: States and Transitions → Start; Model → Editor.

The state machine

A state machine reacts to signals, and in SysML v2 they are plain definitions. After the imports, define four: start request, stop request, plug in and unplug.

On screen: After the imports: four attribute defs.

Below the signals, write the state definition. Charge is an input that the transitions read. Entry, then off, makes off the initial state.

On screen: Below Unplug: state def PowertrainStates with three states.

Transitions and state actions

A transition has a trigger, a guard and a target. After the off state, a start request goes to electric when the charge is above twenty, and to hybrid otherwise. This short form starts at the state it follows.

On screen: After state off;: accept StartRequest if charge > 20 then electric; accept StartRequest then hybrid;

Now give the electric state its actions. Replace its line with a body: the entry action runs when the state is entered, the do action while it is active, and the exit action when it is left.

On screen: Select state electric; and type its body.

After the electric state, the powertrain switches to hybrid when the charge drops below fifteen, and turns off on a stop request. The hybrid state turns off on a stop request too.

On screen: After electric's closing brace: if charge < 15 then hybrid; accept StopRequest then off; after state hybrid;: accept StopRequest then off;

Before the closing brace of the state definition, add the charging state and two named transitions. A named transition says where it starts, with first.

On screen: After hybrid's stop transition: state charging; transition plugIn; transition unplugged.

The State Transition View

Open Behavior, then State Machines, and click New Diagram. Keep State Transition View, choose the powertrain states under Shows, and click Create.

On screen: Behavior → State Machines → + New Diagram; Shows: PowertrainBehavior::PowertrainStates; Create.

States show their entry, do and exit actions, and the dot marks the initial state. Each transition reads its trigger, the guard in square brackets, then a slash and the effect.

On screen: The view.

Draw a timed transition

A full charge takes half an hour, then the car switches off. Select the charging state, and drag from its handle to the off state. The drop makes a transition.

On screen: Select charging; drag its handle onto off.

In the transition panel, name it charged, and set its trigger to after thirty minutes.

On screen: Transition panel: Name charged; Trigger after 30 [min].

Open the Editor. The new transition is in the state definition: named charged, it accepts after thirty minutes, and goes to off.

On screen: Model → Editor: the transition charged.

Exhibit

Last, let the car exhibit the states. Inside the car, after its doc line, add an exhibit state usage. The state machine now belongs to the car.

On screen: In part def Car after doc: exhibit state powertrainStates : PowertrainStates;

Recap

Every step is ticked off. Click Mark as Done.

On screen: Step panel → Mark as Done.

Let's recap. You defined signals, wrote a state definition with an initial state, transitions with triggers and guards, and state actions, drew a timed transition that Holarch wrote into the text, and let the car exhibit the states.

Next, requirements say what the car must do, in a form the model can check.