Capítulos del curso
Formación · Curso 9. Fundamentos de SysML v2 · Capítulo 9.4 de 8
9.4 Estados y transiciones 3:51
Escribir una máquina de estados con disparadores, guardas y acciones de estado, y dibujar una transición temporizada.
Muestra Holarch 2.22.
Lo que aprenderá
- Definir señales y una definición de estado con un estado inicial
- Escribir transiciones con un disparador, una guarda y un destino, en forma abreviada y como transiciones con nombre
- Dar a un estado acciones entry, do y exit
- Dibujar una transición en una Vista de transición de estados y fijar su nombre y su disparador
- Hacer que una parte presente (exhibit) una definición de estado
Escriba una máquina de estados de SysML v2 en Holarch, siguiendo el tutorial de SysML v2 States and Transitions en un pequeño proyecto Hybrid Car: señales como definiciones, una definición de estado con un estado inicial, transiciones con disparadores y guardas, acciones entry, do y exit, transiciones con nombre, una Vista de transición de estados con una transición temporizada dibujada en ella y un coche que presenta los estados. SysML es una marca registrada de Object Management Group, Inc.
Archivos de proyecto
- Proyecto terminado (.holarch.json; Gestionar proyectos → Archivos de proyecto ▾ → Importar proyecto (.json)…)
El vídeo se reproduce desde holarch.app; consulte la Política de privacidad.
Práctica
Hágalo usted mismo en Holarch, en el proyecto de demostración Hybrid Car (SysML v2).
- Abra su proyecto de demostración Hybrid Car (créelo si hace falta: Gestionar proyectos → Archivos de proyecto ▾ → Nuevo proyecto de demostración → Hybrid Car (SysML v2)), abra Modelo → Editor y el paquete
VehicleBehavior. - Después de
attribute def Unplug;, añadaattribute def FaultDetected;. - Antes de la llave de cierre de
state def PowertrainStates, añadastate limpHome { entry action warnDriver; do action driveLimited; }ytransition limpStop first limpHome accept StopRequest then off;. - Abra Comportamiento → Máquinas de estados, haga clic en + Nuevo diagrama, elija
PowertrainStatesen Muestra y haga clic en Crear. - Seleccione
electricy arrastre desde su tirador hastalimpHome; suelte sobre Transición. En el panel de la transición, introduzca el NombreelectricFaulty el DisparadorFaultDetected, y después haga clic en Mostrar en el texto.
Habrá terminado cuando PowertrainStates contenga limpHome, limpStop y la transición electricFault que acepta FaultDetected, y el estado bajo el editor no indique problemas.
Compruebe lo aprendido
- ¿Qué hace que
offsea el estado inicial dePowertrainStates? - Después de
state off;vieneaccept StartRequest if charge > 20 then electric;. Nombre su disparador, su guarda, su origen y su destino. - ¿Cuándo se ejecutan las acciones entry, do y exit de un estado?
- ¿Qué expresa
exhibit state powertrainStates : PowertrainStates;enDrivenCar?
Mostrar las respuestas
¿Qué hace que
offsea el estado inicial dePowertrainStates?entry; then off;: a entry le sigue una sucesión haciaoff, de modo que la máquina de estados empieza allí. La vista lo dibuja como el punto.Después de
state off;vieneaccept StartRequest if charge > 20 then electric;. Nombre su disparador, su guarda, su origen y su destino.Disparador: la señal StartRequest. Guarda:
charge > 20. Destino:electric. La forma abreviada parte del estado al que sigue,off.¿Cuándo se ejecutan las acciones entry, do y exit de un estado?
La acción entry se ejecuta al entrar en el estado, la acción do mientras el estado está activo y la acción exit al salir del estado.
¿Qué expresa
exhibit state powertrainStates : PowertrainStates;enDrivenCar?Que el coche presenta esta máquina de estados: el coche posee un uso de PowertrainStates, de modo que sus estados son los estados del coche.
Más información
Transcripción
Mostrar la transcripción (narración y lo que aparece en pantalla)
Introduction
Chapter four: states and transitions. A state machine says how a system reacts to events, and what it does in each state.
In this chapter you write signals and a state machine with triggers, guards and state actions, draw a timed transition in a view, and let the car exhibit the states.
Start the tutorial
Start the tutorial States and Transitions from Project Files, Start a Tutorial. Its starter project holds the powertrain package with the car, and nothing else yet.
On screen: Project Files ▾ → Start a Tutorial… → SysML v2: States and Transitions → Start; Model → Editor.
The state machine
A state machine reacts to signals, and in SysML v2 they are plain definitions. After the imports, define four: start request, stop request, plug in and unplug.
On screen: After the imports: four attribute defs.
Below the signals, write the state definition. Charge is an input that the transitions read. Entry, then off, makes off the initial state.
On screen: Below Unplug: state def PowertrainStates with three states.
Transitions and state actions
A transition has a trigger, a guard and a target. After the off state, a start request goes to electric when the charge is above twenty, and to hybrid otherwise. This short form starts at the state it follows.
On screen: After state off;: accept StartRequest if charge > 20 then electric; accept StartRequest then hybrid;
Now give the electric state its actions. Replace its line with a body: the entry action runs when the state is entered, the do action while it is active, and the exit action when it is left.
On screen: Select state electric; and type its body.
After the electric state, the powertrain switches to hybrid when the charge drops below fifteen, and turns off on a stop request. The hybrid state turns off on a stop request too.
On screen: After electric's closing brace: if charge < 15 then hybrid; accept StopRequest then off; after state hybrid;: accept StopRequest then off;
Before the closing brace of the state definition, add the charging state and two named transitions. A named transition says where it starts, with first.
On screen: After hybrid's stop transition: state charging; transition plugIn; transition unplugged.
The State Transition View
Open Behavior, then State Machines, and click New Diagram. Keep State Transition View, choose the powertrain states under Shows, and click Create.
On screen: Behavior → State Machines → + New Diagram; Shows: PowertrainBehavior::PowertrainStates; Create.
States show their entry, do and exit actions, and the dot marks the initial state. Each transition reads its trigger, the guard in square brackets, then a slash and the effect.
On screen: The view.
Draw a timed transition
A full charge takes half an hour, then the car switches off. Select the charging state, and drag from its handle to the off state. The drop makes a transition.
On screen: Select charging; drag its handle onto off.
In the transition panel, name it charged, and set its trigger to after thirty minutes.
On screen: Transition panel: Name charged; Trigger after 30 [min].
Open the Editor. The new transition is in the state definition: named charged, it accepts after thirty minutes, and goes to off.
On screen: Model → Editor: the transition charged.
Exhibit
Last, let the car exhibit the states. Inside the car, after its doc line, add an exhibit state usage. The state machine now belongs to the car.
On screen: In part def Car after doc: exhibit state powertrainStates : PowertrainStates;
Recap
Every step is ticked off. Click Mark as Done.
On screen: Step panel → Mark as Done.
Let's recap. You defined signals, wrote a state definition with an initial state, transitions with triggers and guards, and state actions, drew a timed transition that Holarch wrote into the text, and let the car exhibit the states.
Next, requirements say what the car must do, in a form the model can check.