Holarch
課程章節

培訓 · 第 3 單元:行為與架構 · 第 3.4 章,共 6 章

3.4 介面 2:31

為每個介面指定狀態、擁有者與容量,讓項目經由它傳遞,並匯出 ICD。

展示 Holarch 1.27。

← 3.3 分配 · 所有章節 · 3.5 模擬 →

您將學到

  • 閱讀介面登錄表,並依介面狀態篩選
  • 在屬性面板中設定介面的狀態、擁有者、媒介與容量
  • 為傳遞的項目指定資料速率,並閱讀容量檢查結果
  • 將介面的 ICD 匯出為 Word,並開啟系統的 I² 圖

在介面登錄表中管理 Bike-Share Dock 的介面:為行動數據鏈路設定狀態、擁有者與容量,為其承載的項目指定資料速率,閱讀容量檢查結果,匯出介面控制文件,並在 I² 圖中查看停車站的介面。

專案檔案

  • 起始專案 (.holarch.json;管理專案 → 專案檔案 ▾ → 匯入專案 (.json)…)
  • 完成的專案 (.holarch.json;管理專案 → 專案檔案 ▾ → 匯入專案 (.json)…)

影片從 holarch.app 播放;請參閱隱私權政策。

練習

在 Holarch 中於 CubeSat EO-1 示範專案上親自操作。

  1. 開啟您的 EO-1 示範專案,或建立它:管理專案 → 專案檔案 ▾ → 新增示範專案 → CubeSat(引導式系統工程)。
  2. 開啟介面 → 介面登錄表,然後按一下 Proposed 卡片。按一下 IF-14.1 Customer Portal 這一列。
  3. 在屬性面板中,將 Interface Status 設為 Agreed、擁有者設為 Ground Segment Lead、中 設為 HTTPS。保留其 1000 Mbps 的 Capacity。
  4. 開啟介面 → 項目與輸入/輸出,選取 Image Product(入口網站傳輸的項目),並將 Data Rate 設為 50、Data Rate Units 設為 Mbps。回到登錄表,指向 IF-14.1 的 Capacity 欄並閱讀檢查結果。按一下其列上的 ICD 以匯出介面控制文件。
  5. 在資料庫中選取 1 EO-1 Spacecraft,然後選擇開啟方式 ▾ → I2 圖。找到包含 IF-01 Payload Power Line 的儲存格。
  6. 若要進行有檢查的逐步練習,請執行教學課程 7 Interfaces(說明 → 教學課程)。

當 IF-14.1 為 Agreed 且已設定擁有者與 Medium、其容量檢查顯示 OK,且您取得 ICD Word 檔案時,即完成。

自我檢查

  1. Holarch 如何判斷 Conduit 能否承載其項目?
  2. 為什麼資料速率屬於項目,而不屬於 Conduit?
  3. Proposed 或 Agreed 等介面狀態告訴讀者什麼?
  4. I² 圖的儲存格包含什麼?
顯示答案
  1. Holarch 如何判斷 Conduit 能否承載其項目?

    它會加總 Conduit 所傳輸之每個項目的 Data Rate(或 Size),將每個值換算成 Conduit 的單位,再將總和與 Capacity 比較。結果為 OK、Over capacity、Unit mismatch 或 No capacity。

  2. 為什麼資料速率屬於項目,而不屬於 Conduit?

    速率描述的是所承載的內容,而同一個項目可能經由多個 Conduit 傳送。每個 Conduit 的檢查會將其承載的項目加總,並與其自身的容量比較。

  3. Proposed 或 Agreed 等介面狀態告訴讀者什麼?

    兩端的團隊進展到哪裡:Draft 與 Proposed 表示已寫下但尚未獲得雙方接受,Agreed 表示雙方都接受,Baselined 則是最終階段。登錄表的卡片會計算每種狀態的數量。

  4. I² 圖的儲存格包含什麼?

    位於其列與欄的兩個子資產之間的 Conduit:列是起點端,欄是另一端。

延伸閱讀

文字稿

顯示文字稿 (旁白與畫面內容)

Introduction

Welcome back. The dock's parts connect through interfaces: a power cable, a data link. This chapter manages them.

You will work in the Interface Register, the list of every interface in the project.

The register

Open Interfaces, then Interface Register. Each conduit from Getting Started is a row: the cellular data link between the kiosk and the back office, and the power cable from the power supply to the charging unit. Neither has a status yet.

On screen: Interfaces → Interface Register.

Status, owner and capacity

Select the cellular data link. In the inspector, set its interface status to Proposed: the kiosk team has written it down, and the back office team has not agreed to it yet. Its owner is the back office team.

On screen: Cellular Data Link → Interface Status: Proposed; Owner.

Give it a capacity: sixty-four kilobits per second, and set its medium to cellular LTE.

On screen: Capacity 64, Units kbit/s, Medium.

Items it carries

Now say what the link carries. The unlock code from Rent a Bike travels from the back office to the kiosk over this link. In its Trace section, show all relations, and under transfers, link Unlock Code.

On screen: Trace → Show all relations → transfers + → Link existing… → Unlock Code.

For the capacity check, the item needs a data rate. Select Unlock Code in the Database and set its data rate: two kilobits per second.

On screen: Database → Unlock Code → Data Rate 2 kbit/s.

The capacity check

Back in the register, the row counts the item it carries, and the capacity check says OK: two kilobits per second on a link of sixty-four. If the items ever carried more than the link can, the check would turn red.

On screen: Register → capacity check.

ICD and I²

The interface control document is one click away. ICD exports this interface as a Word document for the other team, generated from the model, so it agrees with the design.

On screen: ICD → Word export.

For the whole dock, open the I squared diagram. Select the Bike-Share Dock in the Database, choose Open in, then I2 Diagram. The parts sit on the diagonal, and each cell between two parts holds the interfaces that join them.

On screen: Database → S.0 → Open in ▾ → I2 Diagram.

Recap

Let's recap. You read the register, gave an interface a status, an owner and a capacity, related the item it carries, let the capacity check compare them, exported the ICD, and opened the I squared diagram.

Next, you put numbers on Rent a Bike, and simulate it.