Safety & Reliability
Fault Tree
The events that lead to a hazard, failure mode or risk, combined by gates, with the top-event probability, the minimal cut sets and importance measures.
Where to find it
- Safety & Reliability overview page, Diagrams at the bottom of the rail (+ New Diagram), an item's Open in ▾, or the type selector in the page header of any diagram of a suitable root.
Main actions
- Building the tree: the root is a Hazard, a Failure Mode or a Risk; its inputs are the Failure Modes and Hazards it is caused by. + Add Input adds a new failure mode under the selected event (or the top event); Add Existing Input… picks one; Remove (Delete) takes the selected event out of the tree and keeps the item. A failure mode used in two branches is one repeated event: it is evaluated once, and a repeated intermediate event is drawn in full once and as a transfer triangle elsewhere.
- Gates (an event with inputs, toolbar or the Gate attribute): OR, AND, Voting (k of n, with Voting Threshold = k) and Inhibit (the input together with a conditioning event). Events without inputs (Fault Tree Event): Basic (circle), Undeveloped (diamond), House (a switch: House State True or False) and Conditioning (ellipse).
- Risks: a Risk can be the top event or an input; its inputs are the risks, hazards and failure modes it is caused by. + Add Input under a risk adds a Risk. A risk without inputs uses its Probability (percent, as on the Risk Register; P (%) in the toolbar), and a risk with inputs has a Gate like any event. No Safety & Reliability program is needed. In the CubeSat EO-1 demo, RK-8 is the top event of a fault tree of three risks.
- Probabilities: Event Probability (0–1), or when it is empty 1 − exp(−α·λp·t / 10⁶) from the FMECA's Failure Rate (per million hours), Failure Mode Ratio and Operating Time; events without an Operating Time use the toolbar's Mission (h).
- Analysis pane (under the diagram): the top-event probability with the method used, Exact (binary decision diagram) for most trees, exact also with repeated events; very large trees fall back to the minimal cut set upper bound, labelled so. The rare-event approximation and the upper bound are shown next to an exact value. Minimal Cut Sets lists the smallest combinations of events that cause the top event, most probable first; click one to highlight its events. Importance gives each event's Birnbaum measure (how much the top-event probability changes with it) and Fussell-Vesely measure (the share of the top-event probability that involves it).
- Collapse and expand: with an event that has inputs selected, Collapse in the toolbar hides the events below it (drawn with a triangle, marked Collapsed) and Expand shows them again; double-click a collapsed event to expand it. Arrange ▾ has Expand All and Collapse Below Top Event. A tree of more than 400 events opens with its deeper levels collapsed and a bar above the drawing says how many, with Expand All (it asks first, as drawing thousands of events takes a few seconds). The analysis always covers the whole tree; the choice is saved with the diagram.
- Limits: at most 10,000 cut sets are listed (Diagram Settings → Cut Set Limit…). Beyond that, only those above a probability cutoff are kept and the pane says which cutoff. Large trees are analysed behind a progress bar.
- Export ▾: PNG, SVG, HTML and DOCX as for every diagram, plus Cut Sets (CSV) and Importance (CSV).
Tips
- Every change can be undone with a single Undo.
- Use the FMECA to record failure modes with their rates first; the fault tree reuses them.
Related
Full documentation: Safety & Reliability › Fault Trees