Holarch
Главы курса

Обучение · Курс 9. Основы SysML v2 · Глава 9.4 из 8

9.4 Состояния и переходы 3:51

Запишите конечный автомат с триггерами, охранными условиями и действиями состояний и нарисуйте переход по времени.

Показан Holarch 2.22.

← 9.3 Действия и потоки · Все главы · 9.5 Требования →

Чему вы научитесь

  • Определять сигналы и определение состояния с начальным состоянием
  • Записывать переходы с триггером, охранным условием и целью в краткой форме и как именованные переходы
  • Задавать состоянию действия entry, do и exit
  • Рисовать переход в представлении переходов состояний и задавать его имя и триггер
  • Позволять части демонстрировать (exhibit) определение состояния

Запишите конечный автомат SysML v2 в Holarch по учебному материалу SysML v2 «States and Transitions» на небольшом проекте Hybrid Car: сигналы как определения, определение состояния с начальным состоянием, переходы с триггерами и охранными условиями, действия entry, do и exit, именованные переходы, представление переходов состояний с нарисованным на нём переходом по времени и автомобиль, демонстрирующий эти состояния. SysML является зарегистрированным товарным знаком Object Management Group, Inc.

Файлы проектов

  • Готовый проект (.holarch.json; Управление проектами → Файлы проекта ▾ → Импортировать проект (.json)…)

Видео воспроизводится с holarch.app; см. Политику конфиденциальности.

Практика

Выполните это сами в Holarch на демо-проекте Hybrid Car (SysML v2).

  1. Откройте свой демо-проект Hybrid Car (при необходимости создайте его: Управление проектами → Файлы проекта ▾ → Новый демо-проект → Hybrid Car (SysML v2)), откройте Модель → Редактор и пакет VehicleBehavior.
  2. После attribute def Unplug; добавьте attribute def FaultDetected;.
  3. Перед закрывающей скобкой state def PowertrainStates добавьте state limpHome { entry action warnDriver; do action driveLimited; } и transition limpStop first limpHome accept StopRequest then off;.
  4. Откройте Поведение → Конечные автоматы, нажмите + Новая диаграмма, выберите PowertrainStates в поле Показывает и нажмите Создать.
  5. Выделите electric и перетащите от его маркера к limpHome; отпустите на Переход. На панели перехода введите Имя electricFault и Триггер FaultDetected, затем нажмите Показать в тексте.

Готово, когда PowertrainStates содержит limpHome, limpStop и переход electricFault, принимающий FaultDetected, а строка состояния под редактором не сообщает о проблемах.

Проверьте себя

  1. Что делает off начальным состоянием PowertrainStates?
  2. После state off; идёт accept StartRequest if charge > 20 then electric;. Назовите его триггер, охранное условие, источник и цель.
  3. Когда выполняются действия состояния entry, do и exit?
  4. Что означает exhibit state powertrainStates : PowertrainStates; в DrivenCar?
Показать ответы
  1. Что делает off начальным состоянием PowertrainStates?

    entry; then off;: за entry следует последовательность (succession) к off, поэтому конечный автомат начинается там. Представление рисует это точкой.

  2. После state off; идёт accept StartRequest if charge > 20 then electric;. Назовите его триггер, охранное условие, источник и цель.

    Триггер: сигнал StartRequest. Охранное условие: charge > 20. Цель: electric. Краткая форма начинается в состоянии, за которым она следует, — off.

  3. Когда выполняются действия состояния entry, do и exit?

    Действие entry выполняется при входе в состояние, действие do — пока состояние активно, а действие exit — при выходе из состояния.

  4. Что означает exhibit state powertrainStates : PowertrainStates; в DrivenCar?

    Что автомобиль демонстрирует этот конечный автомат: автомобиль владеет использованием PowertrainStates, поэтому его состояния — это состояния автомобиля.

Подробнее

Расшифровка

Показать расшифровку (дикторский текст и то, что на экране)

Introduction

Chapter four: states and transitions. A state machine says how a system reacts to events, and what it does in each state.

In this chapter you write signals and a state machine with triggers, guards and state actions, draw a timed transition in a view, and let the car exhibit the states.

Start the tutorial

Start the tutorial States and Transitions from Project Files, Start a Tutorial. Its starter project holds the powertrain package with the car, and nothing else yet.

On screen: Project Files ▾ → Start a Tutorial… → SysML v2: States and Transitions → Start; Model → Editor.

The state machine

A state machine reacts to signals, and in SysML v2 they are plain definitions. After the imports, define four: start request, stop request, plug in and unplug.

On screen: After the imports: four attribute defs.

Below the signals, write the state definition. Charge is an input that the transitions read. Entry, then off, makes off the initial state.

On screen: Below Unplug: state def PowertrainStates with three states.

Transitions and state actions

A transition has a trigger, a guard and a target. After the off state, a start request goes to electric when the charge is above twenty, and to hybrid otherwise. This short form starts at the state it follows.

On screen: After state off;: accept StartRequest if charge > 20 then electric; accept StartRequest then hybrid;

Now give the electric state its actions. Replace its line with a body: the entry action runs when the state is entered, the do action while it is active, and the exit action when it is left.

On screen: Select state electric; and type its body.

After the electric state, the powertrain switches to hybrid when the charge drops below fifteen, and turns off on a stop request. The hybrid state turns off on a stop request too.

On screen: After electric's closing brace: if charge < 15 then hybrid; accept StopRequest then off; after state hybrid;: accept StopRequest then off;

Before the closing brace of the state definition, add the charging state and two named transitions. A named transition says where it starts, with first.

On screen: After hybrid's stop transition: state charging; transition plugIn; transition unplugged.

The State Transition View

Open Behavior, then State Machines, and click New Diagram. Keep State Transition View, choose the powertrain states under Shows, and click Create.

On screen: Behavior → State Machines → + New Diagram; Shows: PowertrainBehavior::PowertrainStates; Create.

States show their entry, do and exit actions, and the dot marks the initial state. Each transition reads its trigger, the guard in square brackets, then a slash and the effect.

On screen: The view.

Draw a timed transition

A full charge takes half an hour, then the car switches off. Select the charging state, and drag from its handle to the off state. The drop makes a transition.

On screen: Select charging; drag its handle onto off.

In the transition panel, name it charged, and set its trigger to after thirty minutes.

On screen: Transition panel: Name charged; Trigger after 30 [min].

Open the Editor. The new transition is in the state definition: named charged, it accepts after thirty minutes, and goes to off.

On screen: Model → Editor: the transition charged.

Exhibit

Last, let the car exhibit the states. Inside the car, after its doc line, add an exhibit state usage. The state machine now belongs to the car.

On screen: In part def Car after doc: exhibit state powertrainStates : PowertrainStates;

Recap

Every step is ticked off. Click Mark as Done.

On screen: Step panel → Mark as Done.

Let's recap. You defined signals, wrote a state definition with an initial state, transitions with triggers and guards, and state actions, drew a timed transition that Holarch wrote into the text, and let the car exhibit the states.

Next, requirements say what the car must do, in a form the model can check.