Holarch
Kurskapitel

Schulung · Reihe 9. SysML-v2-Grundlagen · Kapitel 9.6 von 8

9.6 Verifikation und Nachverfolgbarkeit 3:32

Verification Cases schreiben, die RVTM lesen, einen Schritt in der Matrix nachverfolgen und eine Anforderung ableiten.

Zeigt Holarch 2.22.

← 9.5 Anforderungen · Alle Kapitel · 9.7 Constraints und Berechnungen →

Das lernen Sie

  • Eine Verification-Definition mit Ziel und Verdict schreiben und sie auf ein Subjekt anwenden
  • Einen Schritt und ein Ergebnis auf der Seite „Verifikationsfälle“ erfassen
  • Die verifizierenden Fälle und den Status einer Anforderung in der RVTM lesen
  • Eine Anforderung in der Nachverfolgbarkeitsmatrix zu einer Action nachverfolgen
  • Eine Anforderung mit einer Derivation-Connection aus einer anderen ableiten

Verifizieren und verfolgen Sie SysML-v2-Anforderungen in Holarch nach, nach dem SysML-v2-Tutorial „Verification and Traceability“ an einem kleinen Hybrid-Car-Projekt: eine Verification-Definition, deren Ziel eine Anforderung verifiziert, eine auf die Limousine angewendete Verification-Usage, die Seite „Verifikationsfälle“ und die RVTM, ein in der Nachverfolgbarkeitsmatrix angelegtes satisfy, eine Ableitung zwischen Anforderungen und die Modellprüfungen. SysML ist eine eingetragene Marke der Object Management Group, Inc.

Projektdateien

  • Fertiges Projekt (.holarch.json; Projekte verwalten → Projektdateien ▾ → Projekt importieren (.json)…)

Das Video wird von holarch.app abgespielt; siehe Datenschutzerklärung.

Übung

Führen Sie dies selbst in Holarch durch, am Demoprojekt Hybrid Car (SysML v2).

  1. Öffnen Sie Ihr Demoprojekt Hybrid Car (erstellen Sie es bei Bedarf: Projekte verwalten → Projektdateien ▾ → Neues Demoprojekt → Hybridauto (SysML v2)), öffnen Sie Modell → Editor und das Package VehicleRequirements.
  2. Fügen Sie nach verification <'VC-1.1'> sedanWeighing verification def <'VC-2'> BatteryWeighing { subject battery : Battery; objective { verify batteryMassLimit; } return verdict : Boolean = battery.mass <= 50 [kg]; } und verification <'VC-2.1'> sedanBatteryWeighing : BatteryWeighing { subject battery = fleet.sedan.powertrain.battery; } hinzu.
  3. Öffnen Sie Verifikation → Verifikationsfälle. Klicken Sie in der Zeile des neuen Falls auf + Schritte, dann auf + Schritt hinzufügen, geben Sie unter Aktion Weigh the battery on a bench scale ein, klicken Sie auf Anwenden und klicken Sie in seinen Statusschaltflächen auf Bestanden.
  4. Öffnen Sie Verifikation → RVTM und suchen Sie VR-6 batteryMassLimit mit dem neuen Fall und seinem Status.
  5. Öffnen Sie Verifikation → Nachverfolgbarkeitsmatrix, zeigen Sie Anforderungen als Zeilen und die Klasse Action als Spalten, klicken Sie auf die Zelle, in der sich sedanAcceleration und accelerate treffen, und wählen Sie satisfied by.
  6. Fügen Sie am Ende des Package requirement <'VR-9'> tankVolume { doc /* The fuel tank shall hold at least 40 L. */ subject tank : FuelTank; } und connection tankDerivation : Derivation connect carSpec.sedanRange to tankVolume; hinzu. Öffnen Sie dann Verifikation → Modellprüfungen.

Sie sind fertig, wenn die RVTM den neuen Fall gegen VR-6 als bestanden auflistet, der Editor das neue satisfy und tankDerivation enthält und der Status keine Probleme meldet.

Selbsttest

  1. Was sagt verify in objective massObjective { verify carSpec.sedanMass; } aus, und wo sehen Sie es?
  2. Was ist der Unterschied zwischen dem Verdict eines Verification Case und dem Status auf der Seite „Verifikationsfälle“?
  3. Wann verwenden Sie satisfy und wann eine Derivation?
  4. Was geschieht, wenn Sie in einer Zelle der Nachverfolgbarkeitsmatrix satisfied by wählen?
Antworten anzeigen
  1. Was sagt verify in objective massObjective { verify carSpec.sedanMass; } aus, und wo sehen Sie es?

    Dass dieser Verification Case die Anforderung sedanMass verifiziert. Die RVTM listet den Fall gegen diese Anforderung auf.

  2. Was ist der Unterschied zwischen dem Verdict eines Verification Case und dem Status auf der Seite „Verifikationsfälle“?

    Das Verdict ist Teil des Modells: ein Ausdruck, hier ob die Leermasse innerhalb des Grenzwerts liegt. Schritte, Ergebnisse und der Status eines Testlaufs sind Holarch-Daten, die neben dem Modell gehalten werden.

  3. Wann verwenden Sie satisfy und wann eine Derivation?

    satisfy sagt, dass ein Entwurfselement, etwa ein Part oder eine Action, eine Anforderung erfüllt. Eine Derivation verbindet eine ursprüngliche Anforderung mit einer daraus abgeleiteten Anforderung; sie braucht private import RequirementDerivation::*;.

  4. Was geschieht, wenn Sie in einer Zelle der Nachverfolgbarkeitsmatrix satisfied by wählen?

    Holarch schreibt ein satisfy in den SysML-Text, sodass die Nachverfolgung Teil des Modells ist und im Editor erscheint.

Weiterlesen

Transkript

Transkript anzeigen (Erzählung und Bildschirminhalt)

Introduction

Chapter six: verification and traceability. A verification case says how a requirement is checked, and traceability shows what connects to what.

In this chapter you write a verification case and apply it to the sedan, check the RVTM, trace a step to a requirement in the matrix, and derive a requirement.

Start the tutorial

Start the tutorial Verification and Traceability from Project Files, Start a Tutorial. Its starter project holds the curb mass requirement and the car specification, a short drive cycle, and two more requirements: a battery mass limit and stopping from cruise.

On screen: Project Files ▾ → Start a Tutorial… → SysML v2: Verification and Traceability → Start; Model → Editor.

Verification cases

After the verification comment, write the verification definition. Its objective names the requirement it verifies, and its verdict passes when the curb mass is within the limit.

On screen: After // ---- Verification ----: verification def <'VC-1'> CurbMassTest.

Below it, apply it to the sedan: a verification usage that weighs the sedan of the fleet.

On screen: Below it: verification <'VC-1.1'> sedanWeighing : CurbMassTest.

Open Verification, then Verification Cases. The model's verification cases are the test cases here. Steps, results and status are Holarch data next to the model, kept on this page.

On screen: Verification → Verification Cases; the Sedan Weighing row.

In the Sedan Weighing row, click Steps, then Add Step. Type weigh the car as the action, and click Apply.

On screen: + Steps → + Add Step; Action: Weigh the car; Apply.

Then set the result: click Passed in its status buttons.

On screen: Status buttons → Passed.

Open the RVTM. Each requirement is listed with its verification method, the cases that verify it, and their status.

On screen: Verification → RVTM.

Traceability

Now trace a step to a requirement. Open the Traceability Matrix. Its rows are the requirements; open Columns, and choose the class Action.

On screen: Verification → Traceability Matrix; rows: Requirement; Columns: class Action; Done.

Click the cell where stop from cruise meets the brake step, and choose satisfied by. Holarch writes a satisfy into the text.

On screen: Cell stopFromCruise × brake → satisfied by.

In the Editor, the satisfy is there. To derive a requirement, first import the requirement derivation package after the other imports.

On screen: Model → Editor: the new satisfy; import RequirementDerivation.

Then, at the end of the package, connect the sedan's mass requirement to the battery mass limit with a derivation: the battery limit is derived from the curb mass requirement.

On screen: After sedanWeighing: connection batteryMassDerivation : Derivation connect carSpec.sedanMass to batteryMassLimit;

Last, open Verification, then Model Checks. Rules run over the whole model, for example requirements without a satisfy or a verify, and each finding links to its element.

On screen: Verification → Model Checks.

Recap

Every step is ticked off. Click Mark as Done.

On screen: Step panel → Mark as Done.

Let's recap. You wrote a verification case with an objective and a verdict, applied it to the sedan, opened the Verification Cases and the RVTM, traced a step to a requirement in the matrix, and derived one requirement from another.

Next, constraints and calculations evaluate the sedan's values.