Holarch
Главы курса

Обучение · Курс 9. Основы SysML v2 · Глава 9.1 из 8

9.1 Определения и атрибуты 4:33

Запишите типы значений и компоненты в тексте SysML v2 со значениями в единицах.

Показан Holarch 2.22.

Все главы · 9.2 Порты и интерфейсы →

Чему вы научитесь

  • Записывать в редакторе перечисление, тип значения и абстрактное определение части
  • Специализировать определение с помощью `:>` и задавать унаследованным атрибутам значения с единицами с помощью `redefines`
  • Находить и исправлять ошибку единиц, которую подчёркивает проверка
  • Писать определение с помощью «Вставить ▾» и автодополнения и искать тип в стандартной библиотеке
  • Переименовывать элемент везде клавишей F2 одним шагом отмены

Запишите определения и атрибуты SysML v2 в редакторе Holarch по учебному материалу SysML v2 «Definitions and Attributes» на небольшом проекте Hybrid Car: перечисление, тип значения, специализирующий ScalarValue, абстрактный компонент и его специализации со значениями в единицах, ошибка единиц, найденная проверкой, автодополнение и стандартная библиотека, вставка и переименование клавишей F2. SysML является зарегистрированным товарным знаком Object Management Group, Inc.

Файлы проектов

  • Готовый проект (.holarch.json; Управление проектами → Файлы проекта ▾ → Импортировать проект (.json)…)

Видео воспроизводится с holarch.app; см. Политику конфиденциальности.

Практика

Выполните это сами в Holarch на демо-проекте Hybrid Car (SysML v2).

  1. Создайте демо Hybrid Car: Управление проектами → Файлы проекта ▾ → Новый демо-проект → Hybrid Car (SysML v2). Откройте Модель → Редактор и пакет Vehicles.
  2. Под enum def FuelKind добавьте enum def CoolingMode { enum passive; enum active; }.
  3. Под part def Body выберите Вставить ▾ → Определение части и допишите part def Radiator :> Component строками attribute redefines mass = 8 [kg];, attribute coolantVolume : VolumeValue; (введите Volu и примите VolumeValue из списка автодополнения клавишей Enter) и attribute mode : CoolingMode;.
  4. Измените массу на 8 [W], наведите указатель на подчёркивание, чтобы прочитать сообщение, затем верните 8 [kg].
  5. В part def Powertrain добавьте part radiator : Radiator;. Затем поставьте курсор на coolantVolume, нажмите F2 и переименуйте в coolantCapacity.
  6. Для пошагового разбора с проверкой пройдите учебный материал SysML v2 «Definitions and Attributes» (Справка → Учебные материалы).

Готово, когда строка состояния под редактором не сообщает о проблемах, а браузер показывает Radiator под Vehicles с coolantCapacity и mode.

Проверьте себя

  1. Что делают :> и redefines в part def Battery :> Component { attribute redefines mass = 45 [kg]; }?
  2. Почему Component объявлен как abstract part def?
  3. Почему attribute redefines power = 60 [kg]; даёт ошибку?
  4. Чем doc /* … */ отличается от строки //?
Показать ответы
  1. Что делают :> и redefines в part def Battery :> Component { attribute redefines mass = 45 [kg]; }?

    :> делает Battery специализацией Component, поэтому он наследует mass, partNumber и power. redefines заменяет унаследованный mass в Battery собственным свойством (feature), здесь связанным с 45 kg.

  2. Почему Component объявлен как abstract part def?

    Ничто не является компонентом вообще, есть только виды компонентов. Абстрактное определение собирает то, что общее у всех компонентов, а реальные части описывают только его специализации, такие как Battery или Engine.

  3. Почему attribute redefines power = 60 [kg]; даёт ошибку?

    power имеет тип PowerValue, а килограммы — единица массы. Проверка вычисляет единицы, поэтому подчёркивает значение, пока единица не станет единицей мощности, например [W].

  4. Чем doc /* … */ отличается от строки //?

    Комментарий doc — это документация, которая принадлежит элементу и входит в модель. Заметка // остаётся только в тексте и в модель не входит.

Подробнее

Расшифровка

Показать расшифровку (дикторский текст и то, что на экране)

Introduction

Welcome to SysML v2 Fundamentals. This track teaches the SysML v2 textual notation and views in Holarch, one task per chapter, on the starter projects of Holarch's SysML v2 tutorials, so you can follow along step by step.

In this chapter you write definitions and attributes: an enumeration, a value type, an abstract component and the components that specialize it, with values in units.

Start the tutorial

In Manage Projects, open Project Files and choose Start a Tutorial. Under the tutorials for SysML v2 projects, click Start on Definitions and Attributes. Holarch creates a small Hybrid Car project and opens the step panel, which checks each step as you go.

On screen: Project Files ▾ → Start a Tutorial… → SysML v2: Definitions and Attributes → Start; the step panel opens.

Enumerations and value types

Open Model, then Editor. The package Vehicles holds one part definition, Car, with two attributes. Every declaration is a keyword and a name, then a body in braces, or a semicolon when there is no body.

On screen: Model → Editor: Vehicles; outline part def Car.

An enumeration is a value type with a fixed set of values. Above the car, write the drive mode: economy, normal or sport.

On screen: Caret after the imports; type enum def DriveMode.

Next, a value type of your own. Tire pressure specializes Scalar Value from the standard library. The short symbol after the name means specializes.

On screen: Below DriveMode; type attribute def TirePressure :> ScalarValue;

Specialization and units

Now an abstract component. There is no component as such, only kinds of components, and every one has a mass, a part number and a power. The doc comment is part of the model. Two slashes start a note that stays in the text only.

On screen: Below TirePressure; type abstract part def Component.

The battery is a component, so it has a mass, a part number and a power of its own. Write it with a mistake on purpose: a power in kilograms.

On screen: Below Component; type part def Battery :> Component with power = 60 [kg].

The checker underlines the value, and the status under the editor counts the error. Point at the underline to read the message.

On screen: Problems count; the information card on 60 [kg].

Change kilograms to watts, and the error clears. Redefines gives each inherited attribute the battery's own value, with its unit in square brackets.

On screen: kg → W; No problems, Applied.

Completion and the Standard Library

Completion knows the model and the library. Inside the battery, type attribute capacity, a colon, and the start of Energy Value. Press Enter to take it from the list, and end the line with a semicolon.

On screen: Inside Battery: attribute capacity : Ener → completion → Enter → ;

Point at Energy Value. The card shows that it comes from the I S Q package of the standard library.

On screen: The information card on EnergyValue.

The Standard Library page lists every package and definition of that library. Open Settings, then Standard Library, and search for Energy Value.

On screen: Settings → Standard Library; Find EnergyValue.

Insert

Back in the Editor, Insert writes a construct for you. Place the cursor below the battery, open Insert, and choose Part Definition. Type Engine, and press Tab to move into its body.

On screen: Model → Editor; caret below Battery; Insert ▾ (open on camera) → Part Definition; Engine; Tab.

The engine is a component too. Give it its mass and a number of cylinders, and make it specialize Component.

On screen: Body: mass 110 kg, cylinders : Integer; then :> Component after the name.

Usages and rename

Now use the definitions. Inside the car, add a drive mode, a battery and an engine. Each usage is typed by a definition after the colon, the drive mode by the enumeration you wrote first.

On screen: In Car after curbMass: attribute mode : DriveMode; part battery : Battery; part engine : Engine;

To rename a name everywhere it is used, place the cursor on cylinders and press F2. Enter cylinder count and confirm. Every reference to it changes, in one undo step.

On screen: Caret in cylinders; F2; New name cylinderCount; OK.

Every step is ticked off. Click Mark as Done to finish the tutorial.

On screen: Step panel → Mark as Done.

Recap

Let's recap. You started a SysML v2 tutorial, wrote an enumeration and a value type, an abstract component with specializations and values in units, let the checker find a wrong unit, and used completion, the Standard Library, Insert and rename.

Next, ports and interfaces connect these components.